NEW 

Outdrive / Gearcase

 Pressure Tester

This is a great little tool for testing the seals in your outdrive or outboard gearcase. Defective, worn out seals can be detected before water enters the gearbox and causes damage and expensive repairs. Once a leak is detected, the pressure will force air or oil from the outdrive showing you the faulty seal. The test procedure is simple and can be performed by an amateur or pro.

This tester fits Mercruiser Pre Alpha and Alpha from the 1960's to present. Brave 1,2, & 3, OMC, Evinrude, Johnson, Honda (70 - 90 hp), Force, and Gamefisher.

Note: For Alpha 2 Gen 2 & Bravo, or any outdrive using a transom mount oil reservoir (burp bottle), the bottle must be disconnected before testing on the boat. This tester can be used with the outdrive on the boat or in the shop.

The 3/8 x 16 thread will also fit many other models. Please check your vent or drain thread size before bidding.

OMC and Volvo drives have a 3/8 x 16 drain hole and a 1/2 x 13 dipstick hole. The standard tester will fit the drain hole. This works well, but can be messy due to residual gear lube. I offer an adapter for the dipstick hole for $10.95. Note the auction if you wish to include the adapter.

I also have adapters for all models including metrics.

Ships with full testing instructions and a spare O-ring.

All fittings are aluminum or brass and will not rust. Large 2 inch gauge for ease of use.

Testers are 100% tested for leaks and function prior to shipment.

User must supply the air pressure (less than 15 psi) for the test. The tester has an air valve just like a tire. A standard air chuck or tire pump is all you need.

Please see my other auctions.

I also offer a Pressure / Vacuum Tester and complete kits with air & vacuum pumps, screwdriver, and case. Everything you will need for the test.

International buyers welcome.

Questions Welcome

Thanks

Tom

After purchasing, pay instantly with your credit card through PayPal!