PLEASE BID ONLY IF YOU INTEND ON COMPLETING THE PURCHASE!!!

PALL Portable Waste (Vegetable) Oil Purifier WVO

PALL Portable Fluid Purifier

Model: PE-00440-1H

Rated Flow: 3.0 gpm. Max

Max. Delivery Pressure: 70 PSIG

Power Supply: 115 Vac-60 Hz-1 phase-20 Amps

Seal Material: Buna-N

Max Viscosity: 1300 Ssu.

Max. temp.: 145 °F

Discharge Filter Element P/N: GC-00273F-168H

Coalescing Filter Element P/N: AA-4463F-1

Breather Element P/N: PA-00440F-1A

Turn waste oil into clean burnable fuel!

This is a high speed centrifuge that splits out the waste products from the oil. It will separate dispersed water based fluids and other contaminants from oils. It has a cartridge filter pretreatment in front of the pump to remove particals above 5 or 25 microns. You pick the cartidge and screw it on. The oil coming out is super clean, has little to no odor and, if we're talking waste vegetable oil, looks good enough to eat although I strongly recommend against it.

Do your own homework and make your own decision. I assume no risk and make no statements of fact.

It measures roughly 28" w x 34" h x 35" d and it weighs 340 lbs. The unit plugs into a standard wall outlet. It's at my residence and I have no forklift or anything that could lift the unit. It is on a nice set of caster wheels and is easily moved. I have no way of knowing the total number of hours the machine's been run to date. I've only used the machine 4 times myself each time purifing 55gal of prefiltered, preheated WVO and it worked perfect each time. I was able to obtain a copy of a complete set of operating and maintenance instructions from Pall and will include them. The unit requires very little maintenance as per the instructions.

It retails for over $11,000.00 (to see another eBay seller click here) so here is your chance to pick up a fully working unit for less than half price. I'll even run it for you if you need to see it in action.

Pall is still in business and you can visit their web site and see for yourself. http://www.pall.com/Aerospace_3152.asp

Download the brochure Purifier_Brochure.pdf

Info below is taken from Pall's web site:

The Pall Portable Fluid Purifier was specially developed to ensure that the working properties of the fluid being purified are not degraded. Unlike systems that use desiccants, high vacuum or added heat, the Pall Portable Fluid Purifier employs spinning disk and vacuum dehydration technologies which are the most gentle to fluids.

Designed to prevent pollution, increase equipment reliability and performance, and reduce costly maintenance, the Pall Portable Fluid Purifier will automatically remove water, gases, solvents and particulate from hydraulic fluids, lubrication fluids, coolants and synthetic and organic ester based liquids.

Easy to connect, simple to operate and requiring minimum operator attention, the Pall Portable Fluid Purifier uses standard line voltage and connects to your system using inlet and outlet hoses. There are no adjustments to make, no controls to set, no other hookups necessary.

Top Benefits

Extended Fluid Life -- sharply reduces oil change out due to contamination; extended oil change intervals.
Improved System Performance -- fewer costly operational delays, increased system reliability, improved system response with deaerated fluid.
Pollution Prevention -- waste disposal quantities minimized through extended fluid life or eliminated through reuse/recycling.
Short Payback Period -- economical with minimal operating costs.
Reduced Fluid Disposal Costs and Environmental Risk -- sharply reduced need to store, maintain and transport contaminated fluids for disposal.
Reduced System Wear -- less frequent component changes are required; smaller spare parts inventory can be maintained.
Improved Online Performance -- less system downtime resulting from service interruptions.