New WA-Jumbo Parts Washer
Manufactured By
Adventure Manufacturing Inc.
BUILT FROM START TO FINISH IN THE U.S.A. This is not a shell that has been imported and had a brand
name sticker applied to the cabinet.
We start with a flat sheet of steel and custom build your washer from the ground up.
Call us toll free at 1-866-PART CLN 1-866-727-8256
Our History
We have been designing and building parts washing cabinets since 1992. Our most popular washer is the WA-S model which has unfortunately been copied by our competitors and imported from China (Red Cabinets).
Be cautious when buying, some sellers are just trying to make a quick sell and will not be around if you need
service after the sale. We are here to serve you before and after the sale.
The washers that we offer here on eBay are not all that we are capable of building. We custom build parts washers for our customers with larger capacities, larger pumps, higher and wider clearances, and custom turntables with holding racks and baskets. We also design and build automated parts washers with wash, rinse and dry cycles. Please give us a call if you are interested in any custom order 1-866-727-8256.
Model: WA-JUMBO
Oil Skimmer

Specifications
|
Inside Height |
41 inches |
| Inside Width |
53 inches |
| Turntable Diameter |
50 inches |
| Overall Height |
61.5 inches |
| Total Floor Space |
63.5" x 63.5" |
| Load Capacity |
1,000 lbs. |
| Cycle Time |
60 minutes |
| Pump Horsepower |
2 horsepower |
| Pump Output |
145 GPM |
| Heater |
2 x 4.5kw |
| Solution Capacity |
100 gallons |
| Filter Area |
308 sq. inches |
| Electrical Requirements |
220v 1 phase |
| Total Unit Weight |
850lbs |
Basic Operation:
1. Simply load your parts into the turntable basket.
2. Turn the wash timer to desired time.
3. Parts are sprayed with 185º F solution while the turntable rotates, ensuring a thorough cleaning.
4. Parts are clean and ready to be unloaded.
Features:
- Integrated Filter - Catches matter larger that 1/8" to prevent water pump damage.
- Oil Skimmer - Removes oil from the solution to greatly extend solution life.
- Door Design - Loading and unloading with a crane or forklift is easy because half of the turntable is exposed.
- Heavy Duty Casters - Makes movement of the cabinet easier for draining.
Each parts washer will include a: -Small Parts Basket -Part Hanging Tree -Startup charge of cleaner
WARRANTY
This unit comes with a five (5) year warranty covering the cabinet and welding.
A one (1) year parts warranty is also included.
If anything goes wrong with a part just send it back and we will replace it.
We use only quality DAYTON Pumps and DAYTON Motors on our
Parts Washers.
All parts are available from your local Grainger distributor.
Upgrade Options
You may add on any of the following options for an additional charge:
7 Day Heater Timer:
This upgrade will eliminate the wait for the water to heat up.
It allows you to set the Parts Washer to automatically heat up
at a certain time so that when you come in to work it's ready to go.
Mid - Spray Bar:
This upgradee will add an additional spray arm in the middle of the side spray bar to assist
in cleaning shorter parts. This arm can be easily lifted out of the way when it
is not needed.
High Pressure Brass Spray Nozzles:
(We will gladly add nozzles, free of charge, if you want them.)
NOTE: We offer spray nozzles only because our
competition has led people to believe that
they clean better. We DO NOT recommend them for horizontal pumps.
Horizontal style pumps clean significantly better without
restriction from nozzles. If you want them, we will add them. Applications using vertical high pressure pumps are the only time
it makes sense use nozzles.
Gear Driven Turntable:
(Included)
This upgrade will replace the standard brush driven turntable with a
turntable that is rotated using a heavy duty metal gear. This is only necessary if
the primary use of the washer will be to clean heavier parts.
1000 Pound Turntable:
(Included)
If washing heavier parts then you might want to consider upgrading
your washer with a 1000 Pound Turntable. This will increase the
load capacity from 500 lbs to 1000 lbs.
2 HP Water Pump Upgrade
(Included)
This will upgrade the water pump from the standard 1 HP to a 2 HP pump.
The pump output will increase from 80 GPM to 145 GPM.
_______________________________________________________________________
Each parts washer is shipped with one (1) charge of cleaner to get started with.
One charge of cleaner will last about one month depending on usage. Additional cleaner is $2.00 per pound. We offer the cleaner in these two sizes.
Transmission Cleaner (50lbs)
This cleaner is a specially formulated blend designed for use with our parts washers.
It is a low sudsing, high alkaline blend with anti-rust agents. This cleaner will not cause your
parts to rust and is safe for use on aluminum.
Transmission Cleaner (100lbs)
This cleaner is a specially formulated blend designed for use with our parts washers.
It is a low sudsing, high alkaline blend with anti-rust agents. This cleaner will not cause your
parts to rust and is safe for use on aluminum.
Thank you for viewing this auction and please take a look at our other
Please email us with any questions that you have and we will get back to you as soon
as we can. You can also contact us toll free at 1-866-727-8256.
Shipping
Shipping will be FREE to a business address. Buyer will need to have the ability to remove the unit from the truck. (Forklift, shipping dock, etc.) Extra cost will apply if the unit is being delivered to a residence or if liftgate service is required.
Liftgate and Residential Delivery
If your parts washer will be delivered to a residence then there will be an additional cost of $80.00
If you do not have a forklift to unload the unit off of the truck, there will be an additional cost of $125.00 for liftgate delivery.
Payment Options
Payment can be made by:
Visa/Mastercard
PayPal
Money Order
Cashiers Check
Personal check (personal checks will have to clear before unit is shipped)
Financing
We now offer financing through Clearview Financial Inc.
If you are interested in financing your parts washer, just email us your fax number and we can either fax or email an application to you. You can also call 1-888-781-2323 and speak directly to our Financing Agent, Jean Bates.
Bid with confidence, you are buying a quality built Parts Washer. Please read the feedback from our satisfied customers.
 |
Great ebayer. A++++ |
Buyer:
|
May-06-08 04:30 |
| |
New Parts Washing Cabinet - Washer Model WA-S (#110233763049) |
|
View Item |
 |
excellent quality, FIRST CLASS PARTS WASHER! AAAAA+++++++++++++++ |
Buyer:
|
May-02-08 08:09 |
| |
New Stainless Steel Parts Washer Cabinet - Model WA-SX (#120230564436) |
|
View Item |
|

|
Everything took time to coordinate, but it was worth it! Nice Parts Washer! |
|
Nov-12-07 11:32 |
| |
New Parts Washing Cabinet - Washer Model WA-S (#120167743942) |
|
View Item |
 |
|
Nice heavy duty machine. Good customer service. Will deal with again.
|
|
Buyer joeabarton ( 9 ) |
|
Dec-19-05 09:48 |
|
4592654521 |
|
 |
|
wow! what a great company, awesome asset to e-bay,keep it up!!!!!!!!!!!!!!!!!!!!
|
|
Buyer castillo239 ( 3 ) |
|
Dec-06-05 23:39 |
|
4588122704 |
|
|
 |
|
Wow!!! Excellent parts washer (WA-Truck) great workmanship highly reccomendA++++
|
|
Buyer lasscustoms ( 11 ) |
|
Apr-29-05 12:39 |
|
4542977240 |
 |
|
works like a champ, good service, great product. Will highly recommend
|
|
Buyer riddle1943 ( 1 ) |
|
May-19-05 16:27 |
|
4546000847 |
|