|
|
| Rejex Cream - 12 Oz Squeeze Bottle - Never Wax Again! | |
|
THREE PACK 12 OZ Squeeze Bottle
SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, AIRPLANE & MOTORCYCLE
RejeX is a thin-film polymer coating designed to provide a high-release surface. This very thin film – less than a micron thick – reduces the adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. that can leave stains. It also makes graffiti easy to remove and can be applied to windshields to repel rain. It’s easy to apply and produces a deep, lustrous shine that lasts for months.
PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES
RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. RejeX has a higher 'refractive index' than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.
RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax comes off comparatively quickly. There’s no reason to wax over RejeX. As we’ve already said, RejeX leaves a shinier, longer-lasting finish than wax… and the wax can't adhere well to RejeX!
If a RejeX-treated surface needs re-painting, normal paint preparation is all that’s required. Abrasive cleaners, polishes, rubbing compounds or chemical paint strippers will remove the RejeX film.
HOW REJEX WORKS
RejeX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won’t perform up to its potential. RejeX is wiped on, allowed to dry to a haze, wiped off, then allowed to cure for 12 hours. Curing is required to allow the 'monomers' (polymer building blocks) that make up RejeX to attach themselves to the surface being treated and to polymerize (crosslink) into a water-clear, impervious film. It is very important to allow RejeX to cure 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it’s cured, the contaminants will interfere with the film, preventing the RejeX film from achieving it's maximum performance.
We will combine all shipping! Just shoot us an email when you are done and we will send combined invoice. email sales@e-tackle.com, or call 866 719-8609 to pay by phone. CorrosionX Aviation, CorrosionX, RejeX by the Gallon, trigger spray, HD and smaller sizes in our other store listings HERE:  E-Tackle Inc |
|
|
| |
On Mar-15-08 at 07:34:17 PDT, seller added the following information:
| After purchasing, pay instantly with your credit card through PayPal! |
|
    |
On Mar-15-08 at 12:42:27 PDT, seller added the following information:
| | |
Back to home page
) 
E-Tackle Inc
Print
Report item
and your 
Contact the seller 