The Shocker 232 XL Train Air Horn Kit Provides:

These premium horns are the most authentic train horns you can buy for your car or truck producing a beautiful locomotive chord. The horns aren't just made here in the USA; they are also professionally hand-tuned, using individual set-screws and tensioners in each horn, to make them completely accurate. You won't find horns of this caliber anywhere else.

These lightweight horns are made of extremely durable FRP/high-impact ABS materials and are incredibly strong. We've put them to the test by outright abusing them and at the end they always sound as good as new. Their design makes them both compact (measuring 12.75in, 14.75in, 16.25in, 19.5in in length and just 5in at the end of each bell) and lightweight (all four horns weigh just 4.5 lbs!). Their stainless steel diaphragms and brass fittings prevent rust and insure these horns will work for years to come!

Shocker Train Horns Are Made In The USA

As if all the great features above weren't enough, these horns are made in the USA. We believe American made products are of much higher quality than imports and we support American manufacturing whenever possible. That said, these horns are made solely in the USA and will never be outsourced.

All Push-To-Connect Fittings Kit
The Shocker XL Kit comes with all push-to-connect fittings. This saves you time and effort when installing your train horn kit. Plumbing is easy as cutting the tube to the right length and pushing it inside the fitting. There's no hassle of using two wrenches trying to tighten a compression nut down on the tube.

Think of them as Chinese finger-traps and forget about plumbing nightmares. This upgrade comes standard with our Shocker kits, making sure you get the best equipment no matter what you buy.

Viair 325C 150 PSI 33% Duty Cycle Compressor
This compressor fills the included tank in just seconds. It refills the air tank from 110 to 150 PSI in 55 seconds! This means you'll be able to honk more often and not spend that time waiting around for the tank to fill back up. Not only that, but having a fast compressor insures a longer service life, since the compressor will run for less time per cycle, protecting your investment.

The 325C air compressor is a powerful, compact compressor. Its impressive performance is bound to please. The dimensions measure 8.00" in length, 4.00" in width and 7.05" in height and it weighs 6.95 lbs.

Heavy Duty Weatherproof 110/150 PSI Pressure Switch
The pressure switch is completely sealed and pre-wired to make sure it will operate smoothly and resist dust & moisture (not to mention make installation easier!). Then, inside of the pressure switch is a heavy duty 40A relay. This takes the strain off of the actual pressure switch making the unit incredibly reliable.

This pressure switch is pre-fitted with quick disconnects and will plug right in to your compressor. It matches the working pressure of the included compressors and will run the air system to its Full 150 PSI potential. It comes with a strong weatherproof casing that proves a challenge even to intentionally break (we've tried on our test units before; don't worry, this ones new!).

DOT Rated 2 Gallon 3/8" NPT Ported Air Tank
The included 2 Gallon (7.5 liter) air tank is DOT rated to meet US safety standards and rated to operate at twice its working pressure! We recommend only using DOT rated tanks for your pneumatic applications for the safety of yourself and everyone else. The tank measures 17" long with a diameter of 6" (height 7" with mounting legs). This tank features large 3/8" port to provide maximum air flow.
Made In The USA! Quality Does Matter!

Extreme Performance Brass Bodied Valve
The valve is one of the most important parts of any train horn system and usually overlooked. We include an industrial grade, brass bodied valve that provides the kind of performance you'd expect from a HornBlasters product. This valve boasts an oversized 1/2in orifice to allow maximum air flow and is designed to handle pressures far above the working pressure of the horn kit. The brass body of the valve is mark of its strength; valves made of cheaper metals can't withstand as much pressure and stress and may crack or break over time. So why include such a high quality valve? Having a quality valve gives you more control over your air system and helps prevent any kind of failure down the road.