THIS IS A QUALITY BOAT COVER MANUFACTURED IN THE USA. IT IS DESIGNED TO FIT A BOAT UP TO 34'6 WITH A BEAM WIDTH UP TO 120".  IT WILL FIT A CENTER CONSOLE BOAT WITH A T-TOP OR A WALK AROUND CUDDY CABIN BOAT WITH A HARD TOP.

TO ENSURE THAT THE COVER WILL FIT, PLEASE CONSIDER ANY ADDITIONAL EQUIPMENT WHICH YOU HAVE ON YOUR BOAT THAT WILL INCREASE ITS OVERALL LENGTH BEYOND 24'6". FOR EXAMPLE: BOW PULPITS, ANCHOR DAVITS, MOTOR BRACKETS/ JACK PLATES. IF YOU HAVE A SINGLE OUTBOARD MOUNTED ON THE TRANSOM, DO NOT ADD LENGTH FOR YOUR ENGINE. THE COVER IS MADE TO ACCOMODATE A SINGLE OUTBOARD MOUNTED ON THE TRANSOM. YOU NEED TO ADD 1' IF YOUR BOAT HAS DUAL OUTBOARDS.

  THE COVERS ARE MADE OUT OF THE 8 OZ. MATERIAL. COVERS CARRY FIVE YEAR WARRANTIES, COVERING BOTH THE MATERIAL AND CRAFTSMANSHIP.

YOUR COLOR CHOICES:

Beige

Black

Burgundy

Caribbean Blue

Forest Green

Haze Gray

Navy

Red

Teal

Yellow

Storm Gray

THE 8 OZ. SOLUTION DYED POLYESTER MATERIAL IS A LIGHTWEIGHT AND EASY TO HANDLE MATERIAL. IT IS HIGHLY WATER REPELLENT, UV AND MILDEW RESISTANT. THE SEAMS ARE FOLDED 4-PLY. WEATHER RESISTANT ANTI-WICK THREAD IS USED THROUGHOUT THE CONSTRUCTION OF THE COVER.  THE COVER COMES WITH A SELF ADHESIVE REINFORCEMENT/REPAIR KIT, SO YOU CAN REINFORCE THE MATERIAL AT AREAS WHERE THERE ARE SHARP EDGES.

TIE DOWN LOOPS ARE SEWN INTO THE HEM, ABOUT EVERY 3'. THESE ARE USED FOR TYING THE COVER DOWN FOR STORAGE. A TIE DOWN KIT IS INCLUDED WITH THE PURCHASE OF THE COVER. THIS INCLUDES 12 BLACK POLYPROPYLENE STRAPS WITH QUICK RELEASE BUCKLES.

THERE IS A ZIPPERED DOORWAY ON BOTH THE PORT AND STARBOARD SIDE OF THE COVER. THIS IS SO YOU CAN ACCESS THE BOAT EASILY WHILE IT IS COVERED. THERE IS DRAW ROPE WHICH EXTIS BOTH SIDES OF THE DOORWAY. ON ONE SIDE, YOU WILL TIE THIS OFF. WE INCLUDE A ROPE RATCHET SO YOU CAN CINCH THE COVER SNUG TO THE BOAT.

THE COVER HAS A VELCRO SLOT ACROSS THE REAR OF THE T-TOP AREA. THIS WILL ACCOMDATE FOR FOR VHF ANTENNAS, OUTRIGGERS, OR ANYTHING ELSE WHICH STICKS OUT OFF THE BACK OF THE T-TOP/HARD TOP. IT IS DESIGNED THIS WAY SO THE COVER DOES NOT PUT PRESSURE ON TOP OF THE EQUIPMENT. WE ALSO INCLUDE 2 SUPPORT POLES WITH THE COVER. THESE ARE MADE TO FIT INSIDE THE ROCKET LAUNCHERS/ ROD HOLDERS. THESE WILL KEEP THE COVER UP AND OFF OF THE ROD HOLDERS.

!EXTRAS AT NO EXTRA COST!

ZIPPERED DOORS ON BOTH PORT AND STARBOARD SIDES

ROPE RATCHET

2 SUPPORT POLES

TIE DOWN KIT

SELF ADHESIVE REINFORCEMENT/REPAIR KIT

IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO EMAIL ME, I WILL BE HAPPY TO HELP! PLEASE INCLUDE THE MANUFACTURER, MODEL AND YEAR OF YOUR BOAT, INCLUDING ANY EXTENSIONS. ALSO, PLEASE LET ME KNOW WHETHER THE MOTOR IS MOUNTED ON THE TRANSOM, OR ON A BRACKET, AND IF YOU HAVE DUAL OR SINGLE OUTBOARDS. IF YOU HAVE ANY AFTER MARKET EQUIPMENT ON YOUR BOAT, PLEASE SEND ME A PICTURE, SO I CAN ENSURE A PROPER FIT.

CUSTOMER SATISFACTION IS MY #1 GOAL. IF YOU HAVE ANY QUESTIONS OR CONCERNS ONCE YOU RECEIVE THE COVER, PLEASE FEEL FREE TO CONTACT ME. IF THIS COVER IS NOT THE SIZE THAT YOU NEED, PLEASE CONTACT ME AND I WILL BE GLAD TO LIST A COVER FOR YOUR BOAT. WE ARE AVAILABLE TO ANSWER QUESTIONS MONDAY THRU FRIDAY, 9-5 EASTERN TIME.