California Legal? = No (WE CANNOT SHIP THIS ITEM TO CALIFORNIA !!!)

Installation = Bolt-On

49-State Direct Fit Catalytic Converter
MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.

C.A.R.B. Compliance
This converter is NOT compliant with the regulations set forth by the California Air Resources Board. This catalytic converter has been designed and manufactured to meet the emission performance requirements specified by the Federal-EPA for the other 49 States.

LIMITED WARRANTY
Every Magnaflow catalytic converter comes with a warranty certificate that must be registered on Magnaflow's web site. Please refer to this certificate for the warranty details. Under the conditions stated on the certificate, the catalytic converter is warranted for: A) 50,000 miles for California exempted OBD-II converters; or B) 25,000 miles on all other converters, from the date of installation. The manufacturer further warrants the catalytic converter's external shell and end-pipes (those being attached during the original manufacturing process and otherwise unaltered during installation against defects in materials and workmanship, for 5 years or 50,000 miles, whichever comes first, from date of installation.

CAR SOUND QUALITY: Compare Car Sound’s catalytic converters with any other manufacturer and you’ll see why Car Sound has become a leader in the manufacturing of exhaust components. Others may employ one or two of the following features, but only Car Sound puts them all together to create a catalytic converter that exceeds basic need and function. Our years of research and development have resulted in many unique features that are exclusive to Car Sound. We combine efficient manufacturing techniques and state-of-the-art industrial design to produce an end process and product that sets, rather than meets, the highest standards of product performance andefficiency in the industry.



1. Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment.

2. Car Sound converters have a 1/2” lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer.

3. We maintain separate dies on different sized inlets. We don’t skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.

4. Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure.

5. Car Sound uses a heavier gauge stainless steel, tip to tip. An improper coating could result in flow restrictions or an emission test failure.

6. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We don’t weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around.

7. Car Sound installs a factory capped, 90 degree air tube on “with air” converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.

8. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.



Application List
1981 Toyota Supra 6 CYL 2.8L Rear Converter
1983 Toyota Camry 4 CYL 2.0L
1984 Toyota Corolla 4 CYL 1.6L [Exc. Sport]
1986 Toyota Camry 4 CYL 2.0L [Exc. Diesel] [Exc. Canada]
1986 Toyota Celica 4 CYL 2.0L [Exc. GTS]
1988 Chevrolet Nova 4 CYL 1.6L Code 5 Eng. [Fuel Inj.]
1988 Toyota Corolla 4 CYL 1.6L Fuel Injected
1989 Toyota Corolla 4 CYL 1.6L GTS
1995 Toyota Paseo 4 CYL 1.5L
79-80 Toyota Supra 6 CYL 2.6L Rear Converter
80-82 Toyota Tercel 4 CYL 1.5L [Exc. California]
81-82 Toyota Starlet 4 CYL 1.3L
84-85 Toyota Camry 4 CYL 2.0L [Exc. Canada]
84-85 Toyota Van 4 CYL 2.0L
84-88 Toyota Pickup 4 CYL 2.4L [Exc. Diesel]
85-87 Toyota Corolla 4 CYL 1.6L [Exc. Sport]
85-87 Toyota Corolla 4 CYL 1.6L GTS
85-88 Toyota Cressida 6 CYL 2.8L
85-89 Toyota MR2 4 CYL 1.6L
85-95 Toyota 4 Runner 4 CYL 2.4L
86-87 Toyota Van 4 CYL 2.2L
89-92 Geo Prizm 4 CYL 1.6L
89-92 Toyota Pickup 4 CYL 2.4L [Exc. California]
90-92 Toyota Corolla 4 CYL 1.6L [Exc. All Trac 4WD]
90-93 Toyota Celica 4 CYL 1.6L
91-94 Toyota Tercel 4 CYL 1.5L
92-94 Toyota Paseo 4 CYL 1.5L
93-95 Geo Prizm 4 CYL 1.6L
93-95 Geo Prizm 4 CYL 1.8L [Exc. California]
93-95 Toyota Corolla 4 CYL 1.6L [Exc. California]
93-95 Toyota Corolla 4 CYL 1.8L [Exc. California]
93-95 Toyota Pickup 4 CYL 2.4L
95-00 Toyota Tacoma 4 CYL 2.4L
96-97 Geo Prizm 4 CYL 1.6L
96-97 Geo Prizm 4 CYL 1.8L
96-97 Toyota Celica 4 CYL 1.8L
96-97 Toyota Corolla 4 CYL 1.6L
96-97 Toyota Corolla 4 CYL 1.8L
96-99 Toyota Celica 4 CYL 2.2L Rear Converter

Is this the correct part for my vehicle?
The best way to figure out whether or not a part will fit on your vehicle is to research the manufacturer and use their Year-Make-Model search or application guide to determine the correct part number for your application.

Will I be able to install this part on my vehicle without modification?
If the item is described as Universal, then further modification such as cutting and welding is probably required. Items described as Direct-Fit or Bolt-On can usually be installed with minimal modification.

Is this item authentic and brand new?
Yes, we only sell authentic and brand new items. 

Is this catalytic converter legal in California?
All Magnaflow California OBDII compliant converters start with a 4 in the manufacturer part number. All Magnaflow California Pre-OBDII compliant converters start with a 3 in the manufacturer part number. OBD2 emissions systems are standard on all vehicles manufactured from 1996 to present.