Description

STI SPARK PLUG WIRES

New in Box

German Engineering

OEM Quality!

Karlyn/STI has engineered a wire set line that is second to none in every aspect of performance, protection and coverage.

These wires are OE in diameter and fit & come with a full lifetime warranty!

These wires will fit model years: 1999 2000 2001 2002 2003

Applications as follows:

1999-2003 SUBARU FORESTER 2.5L SOHC

1999-2001 SUBARU IMPREZA 2.2L SOHC

1999-2003 SUBARU IMPREZA 2.5L

2000-2003 SUBARU LEGACY 2.5L

2000-2003 SUBARU OUTBACK 2.5L

2003 SUBARU BAJA 2.5L

• Resistance Test
• Temperature Shock Test
• Vibration Resistance Test
• Voltage Leakage (Salt Water Bath) Test
• High Voltage Protection Test
• Voltage Interference Test
• Connector to Cable Holding Force Test
• Engage/Disengagement ForTemperature ce to Plug Test
• Service Life and Endurance Test
• Oil Resistance Test
• Corrosion Resistance Test
Wire Insulation:

The purpose of good wire insulation is to protect the cable from voltage leaks. The single most important factor for rating insulation performance is the type of material used and not the diameter of the wire. Silicone, while resisting temperatures up to 600 degrees (F) will give you the greatest protection. Our Silicone-over-Silicone cable includes two layers of high grade Silicone for superior voltage protection. Common practice among most wire set manufacturers is to provide silicone for the outer jacket only. They may even try to advertise a bigger diameter wire (i.e. 9mm) trying to make you think that Bigger is Better while the main part of their insulation is made up of an inferior material which does not provide protection against voltage leaks. If it doesn't say Silicone-over-Silicone then it isn't. Don't be fooled!

Import Applications:

This line comes equipped with specially designed durable boots, corrosion resistant and oversized clip-lock terminals which allow for positive electrical connection every time you install or reinstall them. Our 8.0mm Silicone-over-Silicone cable includes two layers of only Silicone for superior voltage protection. STI uses proper distributor angle Terminals STI's 90 Degree distributor boots are equipped with 90 degree terminals. This allows for a positive feel of an electrical connection every time you install or reinstall them. Other Brands provide a 90 degree distributor boot, but NOT a 90 degree terminal. When you install their boot on a distributor cap it has a springy feel because you are actually pushing on the wire inside the boot.

Shipping & Handling to the lower 48 states will be $7.50

Shipping & Handling to Canada will be $19.50