INNOVATION AND TAYLOR MADE QUALITY! 

These high quality Taylor Made T -Top Boat Covers are brand new and offer total boat cover protection for center console boats that have fixed position "T" Tops.  You do not pull the cover over the entire T Top cover frame, ( see pictures ). The cover is installed in two halves utilizing zippers. The two cover halves zip together at the mid point of the console body. You zip and secure the cover over your console on one side and then zip secure the other side to complete the installation. The cover can easily be installed in a few minutes, (without ladders), by one person. The cover incorporates several adjustable snap lock straps. During the initial installation you will adjust the boat cover straps so that the cover will conform to fit your boat. These adjustments need to be made only once. The cover design provides a full console cover. Adjustable straps secure the cover halves over the console body windshield hand rail and tighten up the console cover around the "T" Top supports. The front half of the console cover incorporates a protective weather flap that covers the open area between the supports.

THE COVERS FIT CENTER CONSOLE BOATS WITH FIXED POSITION T TOPS.

THE FULL LINE OF COVERS IS LISTED BY SIZE AND PRICE IN MY EBAY DISCOUNT MARINE SUPPLY STORE.  INDIVIDUAL SIZES ARE SEWN IN ONE FOOT INCREMENTS TO FIT BOATS FROM 17 TO 26 FOOT IN LENGTH. 

THIS IS A TRAILERABLE COVER WITH A 5 YEAR WARRANTY! The cover includes a set of 8 pull down straps that tighten and secure the cover to the trailer frame. You can add a second set of 8 straps for $12. The cover is made of an acrylic coated polyester fabric that is breathable and good for all climates. It is mildew and UV resistant and has 5 Year Limited Warranty.

SEWN IN SEVEN COLORS

Pacific Blue	Teal	Cranberry
Navy	Black	Hunter Green		Gray

THIS IS A SEMI-CUSTOM BOAT COVER. 

WE’LL NEED TO KNOW: 1. The color you want. 2. If you have high bow rails. 3. Information about your engine/s and how they are mounted.

A. FOR OUTBOARDS MOUNTED ON THE TRANSOM: Do you have a single outboard? B. Do you have two outboards? If you have two engines we need to know the distance from the corner of your transom to the side of one of your engines cowl, (cover). TELL US IF YOUR OUTBOARD/S ARE MOUNTED TO AN BRACKET ATTACHED TO THE REAR OF THE TRANSOM OR IF YOU HAVE AN INBOARD ENGINE ).

4. THE TRUE CENTER LINE LENGTH of your boat, ( Many manufacturers measure boats following the rub rail from stern to bow tip. IT IS IMPORTANT to check the true straight center line measurement to fit your boat correctly ).  

HOW TO MEASURE TRUE CENTER LINE LENGTH: Measure from the transom to the back side of the console, measure the console body, measure from the front of the console body to the tip of the bow, ( include the bow pulpit if any ). The three measurements will give us an accurate Center Line Length for your new cover.