gecko 4 axis drive 4 taig maxnc sherline cnc lathe mill

Introductory pricing

Our control box is based on the Gecko G540 drive

Contact me if you just want the drive

awdeo@optonline.net

This drive allows for faster rapids and higher feed rates then many available drives

Digitally filtered STEP, DIRECTION and DISABLE inputs

Microstepping at slower speeds then full step morphing at higher speeds

The 10 microstep drive provides 40,000 microsteps per inch, that is really smooth

Mid-band resonance compensation all stepper motors have resonance

Short-circuit, motor disconnect, over/under voltage, reversed polarity, thermal protect.

IF you unplug the motors with the box on or the motors fail, you are protected

 No drive has these features

That $100 or  overseas drive you have been eyeing on ebay, does not have the speed or the sophistication this drive has

Cheap drives=frustration and lost money

The control box features:

• We are the only Taig reseller using this newly designed driver
• Custom made 12 x 8 Anodized aluminum case
• 38vdc linear power supply (48v $20 upgrade)
• Optional spindle or coolant on/off relay ($30)
• optional limit/home switch connection (contact us) ($20)
• Enable/Disable switch

Controller specs: Four 10-Microstep motor drives
      - Mid-band resonance compensation
      - Auto standby current (70% current)
      - Short-circuit protected
      - Optoisolation on all LPT signal pins
      - Two 1A at 0 to 50VDC rated outputs
      - Four SPST to GND inputs (TTL)
      - FAULT indicator LED,signal to PC
      - POWER indicator LED
      - TRIM adjust for motor smoothness
      - Easy to service, removable drives
      - 10kHz watchdog timer (charge pump)
      - Conservative ratings, premium components