Macan Electrosurgery machine brings 6 electrodes, dispersive and cord, and handpiece.  Was used as display in our dental supply company.  If you have any questions don't hesitate to contact myself at donayre1@yahoo.com Please visit the website at www.fladent.com if you are interested in similar machines or supplies.

Shipped by DHL, not included

Great conditions!

Classic conventional ground referenced unit. The MC-6 is a classic conventional ground referenced unit, the MC-6 is a general purpose instrument which provides relatively high power output capability which addresses biopsy and lop excision up to 1.3cm in oral surgery clinical indications. Although the MC-6 will work without a dispersive plate since the dental chair itself will "ground" the patient, this is not recommended. Not recommended for use with bipolar accessories. Not recommended for on current use with monitoring equipment. 6 "Ultra-flex" electrodes, 4x4 metal ground plate. RADIOSURGE MC6A ELECTROSURGICAL UNIT TECHNICAL SPECIFICATIONS IEC CLASSIFICATION class II medical, high frequency surgical, non-ionizing radiation device CONFIGURATION monopolar, isolated output, type BF ports OPERATING MODES CUT CW, 5% ripple, max 50watts into 100ohms +10%-5%, crest factor 1.4 SURGE 50%cut 50%coag blended 50watts into 100ohms +10%-5%, crest factor 1.9 Modulation : 2 x line frequency, 100 or 120Hz, sinosoidal COAG 50% duty cycle 25watts into 100ohms +10%-5%, crest factor 2.6 Modulation : line frequency, 50 or 60Hz, sinosoidal OUTPUT VOLTAGE 500V p-p ( .5kVp p-p ) maximum, open load, CUT mode SOURCE IMPEDANCE 500ohms, nominal OPERATING FREQUENCY 3.0mHz +/-5%, nominal POWER CONTROL manual analog, continuously variable OPERATIONAL DUTY CYCLE 10 seconds ON, 20 seconds OFF ( not electronically enforced ) TEMPERATURE RANGE -20C to +85C storage, 0C to +40C operating, <80% RH non condensing COOLING convection SPALSH RATING IP0 ACTUATION single foot pedal ( isolated low voltage circuit, IP20 rust proof plastic pedal ) DISPERSIVE MONITOR N/A ACTIVE INDICATION LED light, tone ( defeatible ) POWER REQUIREMENTS 120V 60Hz, +/-10%, 240watts maximum consumption 230V 50Hz,+/-10%, 240VA maximum consumption NOTE : field selection of operating voltage requires a skilled technician SIZE AND WEIGHT 6 ½"w, 2 3/4"h, 11 ½"d exclusive of knobs and jacks, 6# (10# shipping) 16,5cm w; 7cm h; 29,2cm d exclusive of knobs and jacks; 2,73kg ( 4,55kg shipping )