BRAND NEW Hermann Schmidt 6" x 6" MAGNETIC SINE PLATE


This listing has ended. Item:BRAND NEW Hermann Schmidt 6" x 6" MAGNETIC SINE PLATE

Item specifics

Condition:	New	Manufacturer:	Hermann Schmidt
Application:	Grinding / Inspection

Here's your chance to own a Brand New Hermann Schmidt 6" x 6" Magnetic Sine Plate, model # PM6X6.

The Sine Plate offered here is brand new in the box, a factory first (no seconds), and will be shipped factory-direct to you.

Hermann Schmidt products are indisputably the finest available in terms of accuracy, consistency and quality - they're simply unsurpassed.

Wood storage case is not included!

Buy It Now and save $1000.00 off the list price of $2175.00!

When you buy from QC Tools you'll receive exactly what we've described and exactly what you expect - no disappointments, no surprises, just complete satisfaction.

We carry an extensive inventory of new and used precision measuring tools from only the top tier manufacturers - all at highly discounted prices - see list below.

WORLDWIDE SHIPPING AVAILABLE!

About the Hermann Schmidt # PM6x6 Magnetic Sine Plate:

The PM6X6 Magnetic Sine Plate has a completely sealed chuck with permanent ceramic magnets which are suitable for wet grinding. The top plate has nine ¼" major poles and ten 1/8" minor poles separated by 1/16" stainless steel strips to maximize holding power.
Bottom plates are oil hardening tool steel, deep frozen for stability, ground and lapped flat. Rolls are oil hardening tool steel and precision ground.
All sine plates come with two hardened rails and a patented locking systems with locks directly over the front roll with a range of 0º to 50º.

Hermann Schmidt # PM6X6 Magnetic Sine Plate Specifications:

Sine Plate Dimensions: 6" X 6" X 4.25" high.

Center distance of rolls 5" ± .0001"

Flat, parallel & square within .0002"

Angles 0° to 45° within .0002"

Completely Sealed.

Constructed of oil hardening tool steel.

Precision ground finish.

Ceramic permanent magnets.

Removeable side rails.

Weight: 30 lbs.

Made in USA.

_________________________________________________________________________________________________________________________________________

QC Tools offer highly discounted precision measuring tools and gages by only the top-tier manufacturers such as Mitutoyo, Hermann Schmidt, Etalon, Tesa, Interapid, Mahr, Brown & Sharpe and Starrett etc.

We offer huge discounts ranging from 40-70% off the manufacturer's list price and by selling directly to the customer we can offer lower prices than an item listed on Ebay. If you need a particular tool that's not listed below please email us with your requirements - we may be able to source it for you.

Photos are available upon request. We accept payment by check PayPal (4% fee applies), Ch'k or MO.

If you need additional information or wish to purchase any of the items listed below please email us: sales@qc-tools.com

Current Sale Inventory

Description	Mfg. model #	Condition	List Price	Your Price
Mitutoyo items:
Height Masters/Height Gages:
Mitutoyo 12" E-Type Height Master with Staggered Gage Block Stack & Digital Counter.	515-319	Like new	$2,470.00	$600.00
Mitutoyo 12" E-Type Height Master with Staggered Gage Block Stack & Digital Counter.	515-319	Excellent	$2,470.00	$450.00
Mitutoyo 18" E-Type Height Master with Staggered Gage Block Stack & Digital Counter.	515-332	Excellent	~$3500.00	$600.00
Mitutoyo 18"/450mm Digimatic E-Type Height Master with Staggered Gage Block Stack & SPC data output. .0001"/0.001mm resolution.	515-357	Like new	$4,080.00	$1,500.00

Gage Blocks:
Mitutoyo Angle Gage Block Set. 2 pcs. 30 & 45 degree blocks. +/-40 seconds accuracy. Hardened & Ground RC55. Boxed.	981-103	Mint	$153.00	$75.00
Mitutoyo LONG Gage Block Set. 8 pcs. Rectangular Steel. GRADE 2 (FS: G-GGG-15C). Range: 1.0-8.0". Wood case. No certs.	516-126	Mint	$1,380.00	$475.00
Mitutoyo Gage Block Set. 9 pcs. Rectangular Steel. GRADE 2 (FS: G-GGG-15C). Range: .0625-2.0". Wood case. No certs.	516-930	Excellent	$312.00	$95.00
Mitutoyo Gage Block Set. 81 pcs. Rectangular Steel. GRADE 1 (FS: G-GGG-15C). Range: .05-4.0". Wood case. No certs.	516-901	Like new	$3,430.00	$750.00

Calipers:
Mitutoyo Digi-Test Digimatic External Caliper. Range .0078-.9842"/0.2-25mm. Res' .0002"/0.005mm. Throat depth 4.33"/110mm. SPC output.	209-860	Mint	$1,220.00	$345.00
Mitutoyo 6" Dial Caliper .001" graduation, .10"/rev' dial face. Thumb Wheel. Storage Case, Hand Setting Tool & Documentation.	505-637-50	Good	$112.00	$45.00
Mitutoyo Toolkit: 6" Dial Caliper .001", .10"/rev' + Depth attachment + 0-1" Analog Micrometer .0001" reading, Friction Thimble + Ruler + Case	950-903	New	$277.00	$145.00
Mitutoyo 6"/150mm Digimatic IP67 Coolant-Proof OFFSET JAW Caliper with adjustable main scale jaw. Case & Battery.	573-701	Excellent	$403.00	$145.00
Mitutoyo 6"/150mm Digimatic Point type NECK Caliper with SPC data output, Case, Battery & Documentation.	573-252-10	Brand new	$652.00	$195.00
Mitutoyo 8"/200mm Digimatic Caliper. Case, Battery & Documentation.	500-197-20	Brand new	$199.00	$135.00
Mitutoyo 8"/200mm Digimatic IP65 COOLANT-PROOF Caliper, Case, Battery & Documentation.	500-653	Brand new	$262.00	$155.00
Mitutoyo 8"/200mm Digimatic *IP67 COOLANT-PROOF* SOLAR-POWERED *SUPER* Caliper, Case, Battery & Documentation.	500-785	Brand new	$266.00	$185.00
Mitutoyo 12"/300mm Digimatic Caliper with Case, Battery & Documentation.	500-193	Brand new	$390.00	$255.00
Mitutoyo 12" Dial Caliper .001" graduation, .10"/rev' dial face. Thumb Wheel. Storage Case & Documentation.	505-677	Like new	$243.00	$125.00

Bore Gages/Bore Micrometers/Borematic Gages:
Mitutoyo Dial Bore Gage. Range: .24-.40" .0001" reading, 2" Probe depth. 9 Anvils. Case, Tweezers & Docs.	511-212	Mint	$546.00	$225.00
Mitutoyo Dial Bore Gage. Range: 1.4-2.5" .0005" reading. 6 Anvils & 4 Spacers. Wood Case & Wrench.	511-160	Excellent	$308.00	$150.00
Mitutoyo Dial Bore Gage. Range: 1.4-2.5" .0001" reading. 6 Anvils & 4 Spacers. Case, Wrench & Docs.	511-164	New	$348.00	$195.00
Mitutoyo RUGGED Dial Bore Gage 1.475-2.075" .0001" reading. Carbide, 6 Anvils, Wrenches & Documentation.	545-134	Excellent	$552.00	$195.00
Mitutoyo SPLIT-BALL Dial Bore Gage. Range: .4-.7". .0005" reading. 8 Anvils. Wood Case & Wrench.	526-120	Excellent	$363.00	$195.00
Mitutoyo .50-.65" Holtest Bore Micrometer .0002" reading. "TiN" coated anvils. Ratchet-stop.	368-264	Mint	$538.00	$225.00
Mitutoyo .80-1.6" Holtest Bore Micrometer Set. .0002" reading. 4 Holtests, individual wood cases with wrenches & docs. 2 Setting Rings.	368 series	Like new	~$2,600.00	$750.00
Mitutoyo .80-2.0" Holtest Bore Micrometer Set. .0002" reading. 4 Holtests, 2 Setting Rings & Extension Rod. Wood case & wrenches.	368-968	Excellent	$2,700.00	$950.00
Mitutoyo .275-.35"/6.925-8.89mm Digimatic Holtest Bore Micrometer .00005"/0.001mm reading, SPC data output. Wood Case.	468-231	New	$929.00	$395.00
Mitutoyo .50-.80"/12.7-20.32mm Digimatic Holtest Bore Micrometer Set .00005"/0.001mm, SPC output. Setting Ring, Ext. Rod, Case, Docs.	468-957	New	$1,390.00	$650.00
Mitutoyo .80-1.0"/20.32-25.4mm Digimatic Holtest Bore Gage .00005"/0.001mm reading, SPC data output. Wood case & Docs.	468-236-10	Mint	$1,060.00	$395.00
Mitutoyo .275-.50"/6.925-12.7mm BOREMATIC Digimatic Bore Gage, .00005"/0.001mm, SPC, 3 Heads, 2 Setting Rings. Case & Wrenches.	568-976	Like new	$1,940.00	$895.00

Micrometers - Ouside/Special Application/Head/Depth:
Mitutoyo 0-1"/25.4mm Digimatic Micrometer .00005"/0.001mm resolution. Ratchet-Stop. Case, Battery, Wrench & Docs.	293-761-30	V. Good	$111.00	$70.00
Mitutoyo 0-1"/25.4mm Digimatic Micrometer .00005"/0.001mm resolution. SPC output, Friction Thimble, Case, Battery, Wrench & Docs.	293-725-30	Brand new	$180.00	$110.00
Mitutoyo 0-1" DEEP THROAT Analog Micrometer .0001" reading. Throat depth: 6". Carbide tipped, Ratchet-Stop. Case & Wrench.	118-129	Like new	$208.00	$125.00
Mitutoyo 0-1" DEEP THROAT Analog Micrometer .0001" reading. Throat depth: 6". Carbide tipped, Ratchet-Stop. Case, Wrench & Docs.	118-129	Like new	$208.00	$135.00
Mitutoyo 0-1" DEEP THROAT Analog Micrometer .001" reading. Throat depth:12". Carbide tipped, Ratchet-Stop. Wood Case & Wrench.	118-107	Like new	$345.00	$200.00
Mitutoyo 0-1" Low Pressure Micrometer. Non-Rotating spindle, 1N constant measuring force, .0001" reading. Friction thimble. Case.	227-111	New	$585.00	$195.00
Mitutoyo 0-1" THIN BLADE Digimatic Micrometer .00005"/0.001mm reading, SPC output, .016" thick blades, Ratchet-Stop with Case.	422-341-30	Excellent	$552.00	$225.00
Mitutoyo 0-1" BLADE Analog Micrometer .0001" reading with .03" thick blades and Ratchet-Stop. Case, Wrench & Documentation	122-125	Excellent	$261.00	$125.00
Mitutoyo 0-1"/25.4mm NON-ROTATING spindle Digimatic Micrometer. .00005"/0.001mm res'. SPC data output. Case & Wrench.	406-721-30	Excellent	$565.00	$185.00
Mitutoyo 0-1"/25.4mm Digimatic DOUBLE SPHERICAL Micrometer. SPC, .00005"/0.001mm res'. Case, Battery, Wrench & Docs.	395-741-30	New	~$350.00	$150.00
Mitutoyo 0-1" Dial Indicating Micrometer .0001" resolution. Carbide tipped, Retractable anvil. No case	510-105	Good	$518.00	$195.00
Mitutoyo 0-1" Thread Pitch Analog Micrometer with 6 Anvils (3 pairs). Case & Wrench.	126-901	Excellent	$797.00	$250.00
Mitutoyo 0-1" Thread Pitch Analog Micrometer with full set of 12 Anvils (6 pairs). Case & Wrench.	126-901	Excellent	$797.00	$325.00
Mitutoyo 0-1"/25.4mm Digimatic Thread Pitch Micrometer. SPC ouput, .00005"/0.001mm res'. Case, Wrench & Battery.	326-711-10	Brand new	$421.00	$295.00
Mitutoyo 0-1.2"/30.48mm Digimatic QUICKMIKE Micrometer. .00005"/0.001mm res'. SPC data output, Non-Rotating spindle. Case & Docs.	293-676	Brand new	$515.00	$350.00
Mitutoyo 1-2" Thread Pitch Analog Micrometer with Setting Standard. Case, Wrench & Docs.	126-138	Brand new	$466.00	$315.00
Mitutoyo 1-2"/25.4-50.8mm Digimatic IP65 Micrometer. SPC output. .00005"/0.001mm res'. Ratchet Stop. Case, Standards, Wrench & Docs.	293-331	Brand new	$244.00	$185.00
Mitutoyo 1-2"/25.4-50.8mm Digimatic Micrometer with SPC data output. .00005"/0.001mm res'. Case, Calibration Standard, Wrench & Docs.	293-722-30	V. Good	$210.00	$90.00
Mitutoyo 1-2" Dial Indicating Micrometer .0001" resolution. Carbide tipped, Retractable anvil. Case, Calibration Standard & Wrench.	510-106	Like new	~$600.00	$285.00
Mitutoyo 2-3" Dial Indicating Micrometer .0001" resolution. Carbide tipped, Retractable anvil. Case, Calibration Standard & Wrench.	510-107	Like new	~$650.00	$315.00
Mitutoyo 2-3"/50.8-76.2mm Digimatic Micrometer with SPC data output. .00005"/0.001mm res'. Case, Calibration Standard, Wrench & Docs.	293-723-30	New	$300.00+	$175.00
Mitutoyo 2-3"/25.4mm Digimatic DOUBLE SPHERICAL Coolant-Proof Micrometer. SPC, .00005"/0.001mm res'. Case, Batt', Wrench, Docs.	395-373	Brand new	$428.00	$225.00
Mitutoyo 0-2"/50.8mm Digimatic Micrometer HEAD with SPC data output. .00005"/0.001mm resolution. Carbided tipped. Boxed.	164-162	Like new	$797.00	$375.00
Mitutoyo 4-5" Analog Micrometer .0001" graduation. Ratchet-Stop. Case, Calibration Standard, Wrenche & Documentation.	103-219	Brand new	$167.00	$115.00
Mitutoyo 0-3" Thread Pitch Analog Micrometer Set. 3 mics: 0-1, 1-2 & 2-3" with one full set of 12 Anvils (6 pairs). Cases, Wrenches & Docs.	126 series	Like new	$1,788.00	$925.00
Mitutoyo 0-4" Analog Micrometer Set. 4 mics in separate cases. .0001" graduation. Ratchet-Stop. Standards & Wrenches.	103 series	New	$503.00	$245.00
Mitutoyo 0-6" Analog Micrometer Set. 6 mics. .0001" graduation. Standards, Case & Wrenches.	103-907	Good	$886.00	$350.00
Mitutoyo 6-12" Analog Micrometer Set. 6 mics. .0001" graduation. Case & Wrenches. NO STANDARDS.	103-909	V. Good	$1,510.00	$450.00
Mitutoyo 0-6"/152.4mm Analog DEPTH Micrometer Set. 6 rods. 2.5" base, .001" graduation. Case, Wrenches & Docs.	129-128	Brand new	$196.00	$115.00
Mitutoyo 0-6"/152.4mm Digimatic DEPTH Micrometer Set. 6 rods. SPC output. .00005"/0.001mm res'. Case, Battery, Wrench & Docs.	329-711-30	Like new	$512.00	$245.00
Mitutoyo 0-6"/152.4mm Digimatic DEPTH Micrometer Set. 6 rods. SPC output. .00005"/0.001mm res'. Case, Battery, Wrench & Docs.	329-711-10	Excellent	$512.00	$195.00
Mitutoyo 0-12"/304.8mm Digimatic DEPTH Micrometer Set. 12 rods. SPC output. .0001"/0.001mm res'. Wood Case, Battery, Wrench & Docs	329-351	Brand new	$629.00	$395.00
Mitutoyo 8-40"/203.2-1016.0mm Digimatic INSIDE Micrometer Set. 5 rods, SPC output. .0001"/0.001mm res'. Wood Case, Battery, Wrench.	339-293	Excellent	$973.00	$375.00

Indicators:
Mitutoyo 0-.5"/12.7mm Digimatic BORE GAGE Indicator .0001"/0.001mm resolution, SPC output, BAR GRAPH. Batteries installed.	543-267B	Excellent	$435.00	$185.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .0005"/0.01mm resolution, SPC data output. Flat Back. Boxed with Battery (1 pc. no box)	543-683B	New	$153.00	$75.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .0005"/0.01mm resolution, SPC data output. Lug Back. Boxed with Battery.	543-683	New	$153.00	$75.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .0001"/0.001mm resolution, SPC data output. Lug Back. Battery installed.	543-177	Mint		$55.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .00005"/0.001mm resolution, SPC data output. Lug Back. Battery installed.	543-692	Excellent	$236.00	$90.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .00005"/0.001mm resolution, GO/±NG judgment, SPC data output. Boxed with Battery & Docs.	543-252B	Brand new	$368.00	$195.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .00005"/0.001mm resolution, GO/±NG judgment, SPC data output. Battery but no Box or Docs.	543-252B	Brand new	$368.00	$175.00
Mitutoyo 0-.5"/12.7mm Digimatic Indicator .00005"/0.001mm resolution, PEAK HOLD TYPE. GO/±NG judgment, SPC data output, Lug Back.	543-262	Brand new	$435.00	$245.00
Mitutoyo 0-1"/25.4mm Digimatic Indicator .0001"/0.001mm resolution, SPC data output. Tolerance functions. Flat Back. Boxed with Battery .	543-453B	Brand new	$492.00	$225.00
Mitutoyo 0-1"/25.4mm Digimatic Indicator .0001"/0.001mm resolution, SPC data output. Tolerance functions. Flat Back with Battery .	543-453B	Excellent	$492.00	$125.00
Mitutoyo 0-1"/25.4mm Digimatic Indicator .00005"/0.001mm resolution. GRAPHICAL COLOR DISPLAY. SPC output. With Power Adapter.	543-552A	Brand new	$579.00	$295.00
Mitutoyo 0-1"/25.4mm Digimatic Indicator .00005"/0.001mm resolution. GRAPHICAL COLOR DISPLAY. SPC output. With Power Adapter.	543-552-1	Excellent	$579.00	$220.00
Mitutoyo 0-2"/50.8mm Digimatic Indicator .0001"/0.001mm resolution. SPC data output. Battery but no box or documentation.	543-463B	Excellent	$618.00	SOLD
Mitutoyo Dial Indicator .0001" reading, .025" travel, .375" dia. Stem, Flat back. Boxed with Documentation.	2803SB-10	Brand new	$139.00	$75.00
Mitutoyo Dial Indicator .0001" reading, .05" travel, .375" dia. Stem, Lug back. Boxed.	2805F-10	Excellent	$143.00	$60.00
Mitutoyo Dial Indicator .0001" reading, .05" travel, .375" dia. Stem, Flat back. Boxed with Documentation.	2923F-10	Brand new	$143.00	$80.00
Mitutoyo Dial Indicator. LARGE 3" FACE .001" reading, 1.0" travel, .375" dia. Stem, Lug back. Boxed with Documentation.	3416	Brand new	$135.00	$70.00

Miscellaneous:
Mitutoyo Anatomic Snap Gage. Range .98-1.97"/25-50mm. Repeatability: < .00004"/ < 0.001mm. Carbide faces. Boxed.	201-806	Brand new	$879.00	$95.00
Mitutoyo Bench Centers. Diametral capacity 5.8", Center to center capacity 11.8". Complete with adjustable indicator mount.	967-201	Brand new	$1,200.00	$650.00
Mitutoyo Thread Pitch Anvil Set. 12 anvils (6 pairs) for Unified 7 Metric thread measuremnt. 3.5-64 TPI/0.4-7mm. No box.	126-800	Mint	$407.00	$200.00
Mitutoyo Calibration Specimen for a surface finish/roughness tester/profilometer. Inch/mm. Boxed.	178-602	Brand new	$163.00	$100.00
Mitutoyo Dial/Test/Bore Gage Calibration/Tester with Software & Accessories, system UDT-280. 0.1 Micron/10 millionths resolution.	170-281-20	Brand new	$14,000.00	$2,750.00
Mitutoyo HH-120 HARDMATIC Portable Digital Hardness Tester. Measures in Vickers, Brinell, Rockwell & Shore scales & Tensile Strength.	810-263A	Excellent	$3,700.00	$1,300.00
Mitutoyo HH-140 HARDMATIC Portable Digital Hardness Tester. Measures in Vickers, Brinell, Rockwell & Shore scales & Tensile Strength.	810-264A	Like new	$3,700.00	$1,450.00
Mitutoyo HH-315 Analog Durometer Gage. Shore A scale. Dial reading 0-100., range 10-90, 1.0 graduation. Case, Lanyard & Docs.	811-315	Mint	$518.00	$195.00
Mitutoyo HH-316 Digimatic Durometer Gage. Shore A scale, range 10-90, 0.5 graduation, Data Hold & SPC output. Case, Battery, Lanyard & Docs.	811-316	New	$1,110.00	$475.00
Mitutoyo Indicator Stand. Serrated Anvil .375" dia. indicator mounting hole, 4" Vertical Capacity, .04" Fine Adjustement. Boxed.	7003	Brand new	$305.00	$150.00
Mitutoyo LGB Linear Gage (slim type probe). Differential Square-wave Output. 0.001mm res', .2"/5mm travel, 8mm stem dia. IP54 rated.	542-204	Brand new	$1,060.00	$325.00
Mitutoyo Micrometer STAND. Made in Mexico, heavy version.	156-101	New	$95.00	$45.00
Mitutoyo Micrometer Standards. 5 standards, 1-5". Complete with Adjustment Wrenches & Case	167-912	Mint	$116.00	$60.00
Mitutoyo Micrometer Standards. 11 standards, 1-11". Complete with Adjustment Wrenches & Case	167-913	Mint	$364.00	$165.00
Mitutoyo Mini-Processor model DP-1VR with Foot Switch, RS-232C cable, SPC cable, Power Supply, Paper roll, Lanyard & Manual. Boxed.	264-504	New	$782.00	$375.00
Mitutoyo Optical Parallels. 4 parallels: .5000", .5062", .5125" & .5187" thick. Case & Documentation.	157-901	Brand new	$456.00	$250.00
Mitutoyo Universal Bevel Protractor Set. 12" Blade & Height Gage Clamp. Case.	187-906	Mint	$309.00	$145.00
Mitutoyo V-Block Set. A matched pair of V-Blocks with Clamps. Capacity 1". Wood case	181-901	New	$175.00	$100.00
Mitutoyo Radius Gage Set. 25 fractional gages 1/64" to 1/2" with gage holder. Vinyl case (holder sleeve adrift). Boxed.	186-901	Brand new	$141.00	$70.00
Mitutoyo Radius Gage Set. LARGE! 10 gages .550" to 1.00" in .05" steps	186-907	Like new	$474.00	$175.00
Mitutoyo "Zero-It" Test Indicator Fixture. Adjustable fixture for precise work positioning.	950-110	Brand new	$185.00	$95.00

Metric only tools/gages:
Mitutoyo Dial Indicator, 0.5mm travel, 0.002mm graduation. Boxed.	2011-11	Brand new	$147.00	$57.00
Mitutoyo 0-10mm Dial Indicator 0.01mm reading, 8mm dia. Stem, Lug back. Boxed.	2046F-01	Brand new	$96.71	$30.00
Mitutoyo 0-12.7mm travel Digimatic LOW FORCE Indicator, 0.001mm resolution. SPC data output. Lug back.	543-254	Excellent	$575.00	$175.00
Mitutoyo 0-20mm Dial Indicator 0.01mm reading, 8mm dia. Stem, Jeweled, Shock-proof & Lug back. Boxed with LIMIT HANDS & Docs.	2050FE-10	Like new	$134.00	$30.00
Mitutoyo 0-20mm Dial Indicator 0.01mm reading, 8mm dia. Stem, Jeweled, Shock-proof & Lug back.	2050S	Good	$134.00	$20.00
Mitutoyo 0-25mm travel Digimatic Indicator, 0.01mm resolution. Boxed with documentation.	575-121	Brand new	$169.00	$69.00
Mitutoyo 0-25mm" Thread Pitch Analog Micrometer, 0.01mm reading. Case, Wrench & Documentation.	126-125	Brand new	$389.00	$250.00
Mitutoyo 0-25mm Dial Indicating Micrometer, 0.001mm resolution with case.	510-301	Like new	~$650.00	$185.00
Mitutoyo 0-25mm Indicating Micrometer with Retractable anvil. Uses any 8mm stem dia. Dial or Digimatic Indicator. Case, Wrench & Docs.	107-201	Brand new	$392.00	$195.00
Mitutoyo 0-25mm Digimatic Micrometer with SPC data output, 0.001mm resolution. Ratchet-stop. Case, wrench, battery and docs.	293-425-20	Brand new	$221.00	$90.00
Mitutoyo 0-25mm Digimatic Micrometer, 0.001mm resolution. Case, wrench, battery and documentation.	293-561-30	Brand new	$165.00	$70.00
Mitutoyo 0-25mm Digital Counter Micrometer, 0.001mm resolution. Case, wrench and documentation.	206-101	Brand new	~$150.00	$60.00
Mitutoyo 25-50mm Digimatic Micrometer, 0.001mm resolution. IP54 rated. Case, wrench, battery, calibration standard and docs.	293-266	Brand new	$248.00	$95.00
Mitutoyo 50-75mm Disc/Flange Micrometer. Case, wrench and documentation.	123-103	Brand new	$249.00	$95.00
Mitutoyo Digimatic Holtest Bore Micrometer Set. Range: 50-75mm. 2 Mics, Ext' Rod, Setting Ring. Case, Wrenches, Batteries, Docs.	468-964	Brand new	$4,640.00	$1,495.00
Mitutoyo Dial Bore Gage. Range: 18-35mm 0.01mm reading. 9 Anvils & 2 Spacers. Case & Documentation.	511-171	Brand new	$313.00	$150.00

Hermann Schmidt Special Sale items:
See full list of Hermann Schmidt products in separate document and please visit www.hermannschmidt.com for product images and specifications.

Hermann Schmidt Angle Plate. 3" x 3" with removeable side plate.	AP3X3	Brand new	$400.00	$225.00
Hermann Schmidt Angle Plate. 4" x 4" with removeable side plate.	AP4X4	Brand new	$665.00	$375.00
Hermann Schmidt Angle Plate. 5" x 5" with removeable side plate.	AP5X5	Brand new	$900.00	$500.00
Hermann Schmidt Wire EDM Vise - Hardened Stainless Steel.	EDMV	Brand new	$975.00	$495.00
Hermann Schmidt Narrow Wheel Dresser.	NWD	Brand new	$645.00	$325.00
Hermann Schmidt 4" x 6" Non-magnetic Sine Plate - storage case is not included.	PNM4x6	Brand new	$950.00	$495.00
Hermann Schmidt 6" x 6" Magnetic Sine Plate - storage case is not included.	PM6x6	Brand new	$2,175.00	$1,100.00
Hermann Schmidt Squareness Master Only.	SQG Master	Brand new	$450.00	$250.00
Hermann Schmidt Squareness Master with squareness master Stand.	SQG M&S	Brand new	$645.00	$445.00
Hermann Schmidt Universal V Block.	UCV	Brand new	$665.00	$425.00
Hermann Schmidt Grinding Vise without holes.	VO4-WOH	Brand new	$735.00	$525.00
Etalon items:
Etalon 0-25mm Microrapid Analog Micrometer. 0.001mm reading. Case, wrench & Docs.	72-116406	Brand new	$300.00+	$150.00

Interapid items:
Interapid Horizontal Test Indicator .0005" reading, .06" travel, 1.5" dia. dial, .687" long Contact Point. Case & contact point Wrench.	312B-1	Brand new	$220.00	$175.00
Interapid Horizontal Test Indicator .0001" reading, .016" travel, 1.5" dia. dial, .687" long Contact Point. Case & contact point Wrench.	312B-3	Brand new	$274.00	$195.00
Interapid Horizontal Test Indicator .0001" reading, .016" travel, 1.5" dia. dial, .687" long Contact Point with Accessories (see Remarks note).	312B-3	New	$274.00	$195.00
Interapid Horizontal Test Indicator .0001" reading, .016" travel, 1.0" dia. dial, .687" long Contact Point. Case & contact point Wrench.	312B-4	Excellent	$271.00	$125.00
Interapid Vertical Test Indicator. .0001" reading, .016" travel, 1.5" dia. dial. Case & contact point Wrench.	312B-3V	New	$297.00	$185.00
Interapid Horizontal LONG Point Dial Test Indicator .0005" reading, .06" travel, 1.5" dia. dial, 2.75" long Contact Point. Case, Wrench & Docs.	312B-15	Mint	$304.00	$215.00

Tesa items:
Tesa 14-17mm IMICRO (Intrimik) Bore Micrometer. 0.0005mm reading. Ratchet-Stop. 3 contact point type. Swiss made,	810802	Brand new	~$500.00	$100.00
Tesa 0-1" Isomaster Analog Micrometer. .0001" reading. Carbide tipped, Friction Thimble. Case & Docs.	00-120101	Mint	~$175.00	$100.00
Tesa 0-1" Isomaster AC THREAD PITCH Analog Micrometer with 2 pairs of ANVILS. Fitted plastic case.	00-220001	Excellent	$616.00	$285.00
Tesa 0-1" Isomaster AC THREAD PITCH Analog Micrometer with 4 pairs of ANVILS. Wood case & Wrenches.	00-220001	Mint	$779.00	$350.00
Tesa 1-2" Isomaster AC THREAD PITCH Analog Micrometer with 1" Calibration Standard (Mitutoyo). Wood case & Wrenches.	00-220002	Mint	$673.00	$300.00

Brown & Sharpe items:
BesTest Horiz' LONG POINT Dial Test Indicator, .0005" reading, .02" travel, 1" dia. dial, 1.4" long Contact Point. Case etc.	599-7034-5	Brand new	$192.00	$95.00
BesTest Horiz' Dial Test Indicator, .00005" reading, .008" travel, 1.5" dia. dial, .5" long Contact Point. Case etc.	599-7033-5	Brand new	$219.00	$125.00
BesTest Vertical Dial Test Indicator. .00005" reading. .008" travel, 1.5" dia. dial. Swivel & Dovetail mounts, .50"L Contact Point. Wood Case	599-7038-2	New	~$300.00	$175.00
Brown & Sharpe/Tesa 0-1.2"/30mm Micromaster Coolant-Proof Digital Micrometer. Case & Docs.	599-125	Brand new	$254.00	$165.00
Brown & Sharpe/Tesa 1-2"/30mm Micromaster Coolant-Proof Digital Micrometer. Case & Docs.	599-126	Brand new	$307.00	$195.00
Brown & Sharpe/Tesa 2-3"/30mm Micromaster Coolant-Proof Digital Micrometer. Case & Docs.	599-127	Brand new	$319.00	$210.00
Brown & Sharpe 1-2" DIGIT MIKE Analog Micrometer .0002" reading. Wood case & Wrench.	599-20-10-1	Brand new	$384.00	$175.00
Brown & Sharpe 2-3" DIGIT MIKE Analog Micrometer .0002" reading. Wood case & Wrench.	599-30-10-1	Brand new	$403.00	$190.00
Brown & Sharpe 0-25mm THREAD PITCH Analog Micrometer with 7 pairs of ANVILS. Wood case & Wrenches.	599-210-11	Mint		$275.00
Brown & Sharpe 12" Dial Caliper. Black face/Orange hand model. .001" graduation. Dial face reads 0-100. Depth bar. Case & Docs.	599-579-12-5-1	Brand new	$285.00	$185.00
Brown & Sharpe Gage Block Set. 81 pcs. Recatangular Steel. Workshop grade. Wood case. No certs.		Fair to good		$200.00
Brown & Sharpe Tri-O-Bor Digital Intrimik Bore Micrometer. Range 1.2-1.6", .0002" reading, max depth 5.4", Carbide anvils, Ratchet thimble.	599-238-16-1	Brand new	~$1100.00	$375.00
Brown & Sharpe Double V-Block with Clamp. Features a regular V and a Right Angle V. 1.31"/33mm capacity.	599-745	New	$320.00	$175.00
Brown & Sharpe/Tesa *Duo* Tool Set: 6"/150mm Digital IP65 rated Caliper & 0-1.2"/30mm Micromaster Digital Micrometer. Case & Docs.	00-591003	Brand new	$422.00	$245.00

Starrett items:
Starrett SPLIT-BALL Dial Bore Gage. Range: .560"-1.565", .0001" reading. 8 Anvils. Wood Case & Wrenches.	82CZ	Mint	$1,268.00	$485.00
Starrett 0-.125" LARGE Face Dial Indicator .001" reading, 3.63" Diameter Dial Face. Lug Back. Boxed.	656-245	Excellent	$170.00	$40.00
Starrett 0-1" Analog Micrometer .0001" reading with Case & Wrench	T436XFL-1	Mint	$108.00	$50.00
Starrett 0-1" Mul-T-Anvil Analog Micrometer .001" graduation with Flat & Pin anvils. Case with Wrench.	220A-P	Nice	$199.00	$80.00
Starrett 0-1" Disc/Flange Analog Micrometer .001" graduation, Ratchet Stop. Boxed with Documentation.	256RL-1	Excellent	$265.00	$55.00
Starrett .05-1.05" Groove Micrometer .001 reading. Flanges .281 dia. X .025" thick. Ratchet thimble. Wood case with Wrench.	260Z	New	$267.00	$145.00
Starrett 1-2" Blade Micrometer (analog) .001 graduation. Boxed.	486P-2	Mint	$305.00	$95.00
Starrett 0-3" Depth Analog Micrometer. 3 rods, .001" graduation, 3" wide lapped base. Case & Wrench. Boxed.	445A-3RL	V. Good	$216.00	$65.00
Starrett 0-6" Depth Analog Micrometer. 6 rods, .001" graduation, 3" wide lapped base. Case, Wrench & Documentation.	445-6RL	Brand new	$244.00+	$145.00
Starrett 1.5-32" Inside Micrometer. 10 Tubular Rods, Handle & 2 Micrometer Heads (.5" & 1" travel) .001 graduation. Wood case.	823FZ	New	$581.00	$395.00
Starrett Parallels Set. Steel, 4 matched pairs, 6" long. Case. Boxed.	S384JZ	Brand new	$380.00	$185.00
Starrett Square - Master Precision Beveled Edge. 6.0" Blade, 4 .31" Beam. Hardened Steel. Boxed.	55-6	New	$236.00	$115.00
Starrett Surface Gage. Hardened/Ground full size base. 9" Spindle with Snug and Scriber	257B	Brand new	$162.00	$80.00
Starrett V-Block with Clamp. Features a regular V and a Right Angle V. 1.31"/33mm capacity.	567	New	$265.00	$125.00

Mahr items:
Mahr 1-2" Analog Micrometer. .0001" reading. Case and Calibration Standard (Mitutoyo).	40A	New		$80.00
Mahr 3-4" Analog BLADE Micrometer. .0001" reading. Case, Wrench, Calibration Standard & Documentation.	40AS	New	~$400.00	$225.00
Various used Mahr Snap Gages with Millimess Indicators - to be listed.

Miscelleaneous items:
Boice Mfg. Adjustable Bore Gage Setting Master. Range: 3-6". Easily set using gage blocks. Ring correlation accuracy within +/- .0001"	#25	Mint	est.$750.00	$175.00
Boice Mfg. Adjustable Bore Gage Setting Master. Range: 6-13". Easily set using gage blocks. Ring correlation accuracy within +/- .0001"	#26	Excellent	est.$1500.00	$175.00
Comtorgage Bore/Hole Gage (Amplifier & Expansion Plug) Size: .8662"/22.001mm .0001" reading. Dial scale: +/- .006". Boxed with Wrench.	CM2	Excellent	$738.00	$125.00
Dorsey Dial Bore Gage. Range: .248-.505". .0001: reading. Probe depth: 2.25". 3 Anvils. Wood Case & Assembly Tool.	DBL-248	Excellent	$795.00	$225.00
Gerstner Wood Tool Chest. 26" W x 15-3/4" H x 9-1/2" D. Capacity: 1854 cu. in. Dark walnut wood with Nickel plated hardware & Cover	W52	New	$930.00	$575.00
Indi-Cal Groove Gage with 1 pair of points + 1 pair of extensions + #7030-5 Bestest Test Indicator .0005" reading, .03" travel, 1.0" dia. Dial Face. Case.	13270	Excellent	$323.00	$125.00
Utica TS-100 Adjustable Torque Screwdriver. 20-100 inch/ozs. Collet chuck for 1/4" bit. Micrometer type torque adjustment. Case & Docs.	TS-100	New	$219.00	$55.00
Metronics Gage-Check 180. Up to 16 gage inputs. DRO res' .000004"/0.0001mm. Color LCD, SPC, PC & Printer connections. Stand & Docs.	GC-180	New	$2,890.00	$1,475.00

Why buy from QC Tools?

QC Tools specializes in high quality precision measuring tools - nothing else.

QC Tools inspects everything it sells. New, factory sealed, tools are visually inspected. Used tools are cleaned, checked and adjusted as required.

QC Tools provides an unsurpassed level of service that's built on a foundation of integrity and professionalism.

QC Tools has vast experience in the metrology and engineering fields.

QC Tools wants you to be 100% satisfied with your purchase so please bid with total confidence.

About shipping costs: It's becoming increasingly expensive to ship items due to escalating carrier fees. Aside from the carrier's shipping cost we have to factor in the cost of packaging materials (such as boxes, bubble wrap, packing peanuts, tape, printed labels etc), labor and dropping off the package for shipment.

We are not liable for uninsured items that are damaged or lost in shipping transit.

Attention International Bidders! Contact seller for an international, worldwide, shipping quote. Any applicable foreign import duties/taxes are the sole responsibility of the buyer.

Attention Local Buyers! We do not offer pick-up (will call) or delivery services. All items are shipped.

If you don't use PayPal please contact us to make alternative arrangements.

Need tools? See our other items!

Our Ebay listings are protected under the United States of America Copyright Laws and therefore may NOT be copied!

00036

Shipping and handling

Item location: San Jose, California, United States

Shipping to: Worldwide

Quantity: Change country:	ZIP Code:

Shipping and handling	To	Service	Estimated delivery*
US $30.00	United States	Standard Flat Rate Shipping Service	Varies Seller ships within 3 day after receiving cleared payment.

*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.

Domestic handling time

Will usually ship within 3 business days of receiving cleared payment.

Return policy

Item must be returned within

Refund will be given as

Return policy details

7 days after the buyer receives it

Money Back

All sales are final unless the item is deemed not as described as per the Ebay listing description or the item is DOA.
Items must be returned within 7 days of receipt for a full refund minus the original shipping and insurance charges. 
Returned items must be received in exactly the same condition as when they were shipped to the buyer and contain all original paperwork/accessories etc. 
The return shipping cost is the responsibility of the buyer.

The buyer is responsible for return shipping costs.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	Accepted	Pay with and your full purchase price is covered \| See terms

Seller's payment instructions

Payment to be received within 3 days of the auction close. A dispute will be filed against non-paying bidders. Delivery confirmation is included in the shipping cost of $30.00 (US delivery). Contact seller for an international, worldwide, airmail shipping quote.

#PM6x6: Sealed Chuck/Ceramic Magnets/.0002" Accuracy