New Unlocked UTStarcom F1000 WIFI VoIP SIP Phone, it can be brought to and used at everywhere while connected to the wireless network. It has been upgraded to the latest firmware 4.50st.
It can be used with any voip provider who support BYOD(Bring your own device). Tested with Freephoneline.ca, Acanac, VoIPStunt and VoIPBuster.
** This unlocked phone has no password to login to the admin mode, but all the configuration can be done under the user mode. Documents for your reference: * Quick Start Guide * User Manual Each Package including:
-One Unlocked Utstarcom F1000 WIFI VoIP Phone -One battery (An extra battery is 10$. An extra battery with charger are 15$. You may pay the extra 10$ or 15$ when you check out and add a note) -One charger How to Config:
1. 1. To connect the WIFI phone to your wireless network. Press the Menu button. Scroll down to WiFi-Settings and click OK. . Select Net Search option and click OK. A list of SSID (names of available wireless access points) will appear onscreen. Select the correct device from the list and press SAVE. Press SAVE again at the prompt. Select Security Mode from the options list and press OK. Choose the security mode from the list specified by your network administrator (eg WEP Key or WPA-PSK, etc) and pressOK. A notice will appear on the screen Enter Code (0-6), enter 888888 (six 8's), Configure the parameters presented based on your chosed security mode. For example, for WPA-PSK, define the PSK key. Press OK to save. Select Activate and press OK. 2. 2.To obtain the IP Address press Menu, scroll down to WiFi-Settings and click OK.
Select Network Parameter and press OK. Your IP Address will show up on the screen! Make a note of it. 3. 3.To configure your VoIP account Type the IP Address into the web browser of your PC. At the password prompt, Login: user and Password: 888888. The welcome screen should appear. Click on USER MENU on the left and then click on SIP and RTP Config. Now you can fill in the parameters of your VoIP.
4. 4.Click on Codec and DTMF on the left, the screen below will appear:
5. 5.Click on the REBOOT on the left to reboot your phone.
Here is the screenshot of configuration for www.acanac.com and www.freephoneline.ca 
 
Overview:
The residential UT Starcom F1000 Wi-Fi handset is a revolutionary device that expands the reach of VoIP communications. It provides consumers a new cost effective way to communicate, with great features such as 3-way Calling, Call Waiting, Call Transfer and many popular features.
| Product Description | UT Starcom F1000 WI-FI Wireless Handset - Wireless VoIP Phone | | Device Type | WI-FI VoIP Phone | | Form Factor | Bar Type Design | | Wireless Protocols | 802.11b/g/n | | VoIP Supported | SIP (Session Initiation Protocol) SDP (Session Description Protocol) RTP/RTCP RFC 2833/Inband DTMF | | Other Protocols | DHCP (Dynamic Host Configuration Protocol), TFTP/HTTP, NTP | | Headset Support | Earphone supported | | Management | Web Interface /Local Log / System Log | | Languages | English, French | |
| Technical Profile | | Dimensions (HxWxD) | 11 x 4.5 x 2.2cm | | Weight | 111g | | Battery | Li-ion DC 3.6V 1500 mAh | | Charger Input | 100~240VAC 50~60Hz 120mA | | Talk Time | Up to 4 hours | | Charging Time | 2 ~ 3 hours | | Standby Time | 80 ~ 100 hours |
| Certifications | | Certification | FCC ID:06-Y-F1000 IC and CE |
| System Standards | | Communication System | Wi-Fi (802.11b/g) | | Frequency Band | 2.4GHz | | Transmission Output | 20mW |
| Voice Processing | | Codecs | Code G.711u, G.711a, G.729a Comfort Noise Generation (CNG) Voice Activity Detection (VAD) Adaptive Jitter Buffer Echo Cancellation |
| VoIP/IP Protocol | | Protocols | SIP - RFC 3261, 3264, 3515 HTTP Authentication - RFC 2617 RTP/RTCP - RFC 1889, 1890 SDP - RFC 2327 RFC 2833/Inband DTMF STUN - RFC 3489 DHCP - RFC 2132 HTTP/TFTP for Provisioning and Firmware upgrade |
| Advanced Features | | Features | WEP 64/128 bit, WPA-PSK TKIP AP handover/roaming WiFi Network search Auto Scan SIP server failover DNS server failover Voice Mail indication AES encrypted remote provisioning Scripting support for HTTP based Hotspot Login Web based provisionin |
|