# 8 X 2-1/4" 316 Stainless Steel Trim Screws Qty 2 lbs.

• # 8 X 2-1/4" 316 STAINLESS STEEL TRIM  SCREWS

• #2 Lox Drive Bit Tips

• Quantity 242 pcs.

• Shipping weight 2 lbs.

• Marine Applications

• Exterior Decking

• Piers Docks

• Wood to Wood

• Before you decide on your fasteners take a moment to decide which stainless grade you need?

  You have a choice of stainless grade with many of our fasteners. 
  Type 304, 305 or 316 Stainless Steel
  
  all three grades of stainless steel are nickel/chromium and all are non-magnetic.
  
  Type 304 stainless meets virtually all requirements except repeated exposure to sea water.

  Type 305 stainless also meets virtually all requirements.Has more resistance than 304 and is especially resistant to the tanning produced by Cedar and other lumber. But for a harsh coastal environment it is better to use 316 SS.
  
  Type 316 is better in a coastal or harsh environment since it contains more nickel as well as 2% to 3% molybdenum, giving it superior corrosion resistance.
  
  All of the above grades are a major advance over other commercial choices.
  
  There is absolutely no question that your best bet is stainless steel for any of the treated timbers and that includes wood foundations in particular, since the fasteners here are subjected to constant high humidity in addition to chemical attack.
  Stainless-steel fasteners cost only a small amount more related to a total project budget, but they can have a significant effect on the life span of a structure.

                                                                                                      LOX   FEATURES

LOX features eight contact points--twice as many as the four points of Phillips and Robertson designs. Eight points that transfer extraordinary torque while holding a positive engagement, drive after drive.

Decades-old technology is not a good match for today's demanding applications. Drive systems like square and cruciform are unreliable and cam out too easily, resulting in poor joint reliability, higher materials waste, and lower productivity.

LOX is a technologically advanced driver system engineered for high-torque applications. LOX grabs hard and sinks even harder, giving you positive joint reliability with predictable results every time.

The patented LOX recess easily outperforms every competing drive system on the market, delivering three distinct advantages:

• Maximum Torque

• Minimum End Load

• Longer Bit Life