My digital camera has a built-in
flash. Why do I need another?
Built-in flashes are only effective to 8-10ft
or less. This high power flash greatly extends the range!
The built in flash units of digital
cameras are on average effective to only about 8-10 feet, and
that's when your lens is at its widest-angle setting. When
you want to zoom in on the action (towards the telephoto end of your
zoom range) you'll find that your built in flash does exactly
opposite of what you want, and its range is reduced!
So, when you want to use your camera's telephoto
capability that you paid for, but also require the built in
flash, your pictures come out dark or, even worse!
The new advanced slave circuitry of
the Pro Digital Auto Slave Flash with Bracket Set is not
fooled by the "pre-flash" and eliminates the need for an electrical
connection to your camera.
Can I use with
a telephoto or wide-angle conversion lens?
YES!
Unlike your camera's built in flash; the flash is mounted to the
side where even the largest conversion lenses will not block it. You
will enjoy more even illumination and at a much greater distance,
which is especially needed when working with your telephoto lens.
Does it require special
batteries? NO!
This flash uses standard AA size (alkaline or rechargeable NiMH)
batteries to power the flash for hundreds of shots.
What cameras will
it work with?
Virtually any camera, digital or film!
The Pro Digital Auto Slave Flash with Bracket Set is
compatible with virtually any digital or film, point and shoot
camera with a built-in flash including: Canon, Casio, Epson, Fuji,
GE, HP, Kodak, Kyocera, Konica Minolta, Leica, Nikon, Olympus,
Panasonic, Pentax, Polaroid, Ricoh, Samsung, Sony, Pro, Toshiba and
Vivitar. It can even be used to improve the typically poor flash
pictures taken by any Camcorder or Cell phone Camera that has a
built-in electronic flash!

To
reduce or totally eliminate “Red-Eye”
Even using the red-eye reduction feature of your camera (because the
built-in flash is too close to the lens) the flash reflects off of your
subjects retinas directly back into the lens and often results in pictures
with “red-eye”.
The distance advantage alone of the flash on the bracket greatly
reduces or eliminates this "red-eye" causing retina flash bounce back.
Specifications:
|
Flash Mode Settings: |
4 Slave Switch Selected Modes (No
delay + 3 additional delays that can be set to ignore the
various “pre-flash” types used by different camera models) |
|
Power Settings: |
Normal / Slave On |
|
Recycling Time (Full Power/ New
Batteries): |
.3 to 4 sec. (NiMH) / .3 to 6 sec.
(Alkaline) |
|
Triggering: |
Digital Slave |
|
Power Source: |
2 AA Batteries in Flash (Alkaline/
NiMH) ( Battery is not included) |
|
Dimensions:(L x W x D) |
Flash: 3.5 x 2.25 x 1.0 in. (88.9 x 57.2 x 25.4 mm)
|
|
Weight (w/o batteries):
|
Flash: 2.3 oz. (65 grams)
Bracket: 1.6 oz. (45 grams) |
| |
|