AquaCraft Hammer 24" Deep Vee Racer Boat EP RTR Combo

Your choice of Body Color
Red White Blue Yellow Purple Orange

+

Package Content: 

• One Aquacraft Hammer EP RTR Kit (AQUB10):

  • One assembled Hobbico Hammer boat with 550-size motor. Your choice of color

  • 2-channel Aquacraft by Futaba AM Pistol style radio with pre-mounted electronics. 75MHz Surface Band.

  • Electronic Speed Control

  • Illustrated instruction manual

  • Plastic display stand

  • Decal sheet

• Duratrax Battery & AC DC Charger (DTXP4610):

  • 7.2V 1500mAh NiMH stick battery pack with Tamiya type connector

  • AC/DC charger with Kyosho type connector and alligator clips for DC use

  • Tamiya to Kyosho adapter lead.

 This is the electric powered radio controlled Ready-To-Run Aquacraft (by Hobbico) Hammer Deep Vee Racer Boat kit.
Suitable for modelers 14 years of age and older.

Click on images below for larger view
1. The Hammer's strong nylon prop and rudder provide durable, long-lasting performance!	2. Its low-drag hull includes chine rails to improve water flow and trim tabs that can be adjusted to fine-tune handling.	3.The waterproof radio compartment features a screw-down cover that allows easy access to the on-board radio equipment while sealing out water. Your 6- or 7-cell battery pack easily installs directly in front.
4. The Hammer comes equipped with a powerful, factory-installed 550-size electric motor. The motor is equipped with a water-cooled jacket that helps it run cool even at maximum speeds.	5. The hatch provides water protection and the look of twin racing cockpits. Everything inside is instantly accessible, just by removing a single clip.	6. A stand is included so that you can admire the Hammer on display when you're not out enjoying its performance on the water.
Online VIDEOS: Low Res (1.2 MB) | High Res (2.1 MB) Reviews: RC Universe

• 8AA Batteries for Transmitter
• Battery: 6- or 7- cell w/ standard connector flat. See My eBay Store.
• Charger: AC/DC Timed or Peak for 6-cell battery. See My eBay Store.
• Tom's Recommendation for Battery & Charger

SPECIFICATIONS:

• Hammer EP Manufacturer's Web Page
• Hammer:
  • Length: 24" (610mm)
  • Beam (width): 8.75" (220mm)
  • Height: 5" (126mm)
• Charger
  • Battery Type: Sub-C NiMH, 7.2V 1500mAh
  • Fast Charge Time: 30 minutes to auto trickle
  • Timer Start: Auto when battery connected
  • Protection: Auto short circuit
  • Input: 110V AC, 12V DC
• Battery
  • Length: 5.3" (135mm)
  • Width: 1.7" (44mm)
  • Thickness: 0.90" (23mm)
  • Weight: 10.4oz (295g)
  • Wire Size: 14 AWG