2002 Angel LCD C&C "wings" Custom Many Upgrades Purple

The ANGEL LCD ^TM has a number of features that can be adjusted to suit your individual needs. These features are designed to enhance your play and also to supply you with a wealth of information. These are accessible via the external menu list. You can also read the setting that has been set via the internal menu list. (See external menu diagrams)

• The menus can only be accessed when the marker is in “SAFE” mode and the Tab Key is removed.
• Follow the external menu list diagrams for relevant settings.
• Should you wish to return to factory settings the ANGEL LCD ^TM has a unique feature that allows you to return to the factory defaults. See internal menu diagram for instructions . The ANGEL LCD ^TM also has the unique feature that ensures any settings that you enter are stored in a non-volatile memory that will not be lost by the removal of the battery or a flat battery status.
  

Back-light feature

This enables you to switch ON or OFF the back- lighting on your display. (See external menu diagrams for setting).

Temperature feature

This allows you to set the temperature display between Fahrenheit and Centigrade. This feature is useful in determining the ambient temperature to allow you to select your accessories for the climatic conditions in the format you prefer. NOTE: This can not be changed by the external menu (See Internal menu diagrams for setting).

Cycles (total shot) feature

This is a chronological record of the total number of shots fired by your ANGEL LCD ^TM . The user cannot reset this. (See external menu diagrams for setting).

Trip (shot counter) feature

This allows you to record the number of shots fired at any stage e.g. Per game, per event or per day. It may be reset at any time you require. (See external menu diagrams for setting).

Faults feature

This is a self-diagnostic fault finding program that will check the condition of the electronic circuits.

TAB IN   = Battery disconnected or Tab Key inserted when trying to charge

CODE 1 = Faulty battery (NOTE CODE) can occur during the first 3 charges when new or replacement battery is fitted

CODE 2 = Hopper using too much power (sticky motor)

CODE 3 = Over temperature (ambient temperature too high)

CODE 4 = Under temperature (ambient temperature too low)
(See external menu diagrams).

ID Number feature

Unique ID numbers that must be quoted for all repair work.
(See external menu diagrams).

ROF feature (rate of fire)

This records the highest rate of fire achieved over a 1-second period. The data will be constantly updated should the new reading exceed the previous reading. The ROF feature can be zeroed at any time. (See external menu diagrams for setting).

MROF feature (maximum rate of fire limit)

This allows you to tune your maximum rate of fire to your style of play and feed system. Certain modes are capped and non-adjustable. The rate of fire should not be set greater than what your feed system is capable of delivering. This can not be changed by the external menu (See Internal menu diagrams for setting ). See table on Modes for maximum allowable settings. NOTE: This can not be changed externally.

Timer feature (game timer)

The “vibes” timer is a unique interactive game timer that takes the stress out of game play. It will also allow you to play set moves in unison with your team mates. The timer can be set in 1 minute increments from 5 to 20 minutes then in 5 minute increments from 25 - 60 minutes. The timer is started via your first shot, which allows you to concentrate on your game play. The alarms will activate every 5 minutes, the last minute and the last 10 seconds of the set time. (See setting and using game timer diagrams ).

Dwell feature

Dwell is what controls the valve opening time. Longer dwell uses more gas and generates more noise but allows the marker a greater tolerance to paint, temperature and pressure variables. Shorter dwell uses less gas and reduces noise but will not tolerate poor quality paint.

Caution: Adjustment is only recommended if you wish to fine-tune your marker to specific accessories.  (See Internal menu diagrams for setting ). NOTE: This can not be changed externally.

Vibes game alarm feature

This feature allows you to switch the vibrator alarm On or Off. The vibes alarm is independent of the game timer functions. 

Mode feature

26 modes of shooting may be selected. The firing modes listed are programmed in the ANGEL LCD ^TM . including 5 modes that you may program yourself using the ANGEL DATA LINK.  NOTE: This can not be changed externally.


  In certain countries local applicable laws may mean certain modes may not be enabled or allowed. Check with law enforcement office, or local professional paintball venue.

Battery Status feature

The battery status is indicated at all times by the 4-segment display. Power is drawn whilst the ANGEL LCD ^TM has power connected. A battery will last approximately 280 hours until it is discharged. To prevent this discharge ensure the Tab Key is inserted at the end of the day or event. The last segment indicates that you have approximately 16000 shots left with a hopper being powered.

Pin number feature

If you have entered a Pin number this feature allows you to enter the pin number to lock or unlock your ANGEL LCD ^TM. The Pin Feature will help to prevent unauthorized use.

Caution: Once the pin number is set should you forget your pin code, and cannot unlock the ANGEL LCD TM you must contact WDP Ltd and have to hand your unique serial number. This can be displayed by pulling the trigger when the ANGEL LCD ^TM is locked or in safe mode. You must also provide verifiable proof of purchase and identity before we will issue you a unique unlocking code to your ANGEL LCD ^TM.  When entered this code allows you to enter a fresh pin number. You may incur a small administration charge for this service.

GOOD LUCK!!!