4" Granite Marble Concrete Wet Polishing Pad Set Pads

Features: We're proud to introduce to you this 4" High Quality Granite & Marble Polishing Set. For use with Granite and Marble. This set comes with a total of 8 pads and a 4" velcro backer pad(5/8" thread). They are 4" in diameter. **Don't be fooled by other cheap polishing pads that can't compare to these.**

This set includes the following items: 50 grit, 100 grit, 200 grit, 400 grit, 800 grit, 1500 grit, 3000 grit and Buff. This set comes with 8 pads and also the backing for the pads.

These pads are to polish Granite or Marble stone. You can make a nice smooth finish for your stone.

These pads are a great value. Where else can you get this price for these items. To buy this from a store or a distributor would cost over $150.00 for all the pads. But you get all this for a great price.

You get a free 4" Velcro Backer:**(fits standard 5/8"x11 threaded angle grinder)**

Here is some additional information:

Our's polishing pads are designed to achieve a monument quality finish on all straight or shaped surfaces. The unique design of the polishing pads allows for rapid and even removal rates with minimal effort. When used correctly, these pads provide a clear advantage over all other polishing methods. **(Max. RPM for the pads is 4500)**

Polishing Steps:

1. Cut or shape material to the desired surface or pattern using either a diamond blade or diamond cup wheel.
2. Using a clamping device, secure material to be polished to a proper work surface.
3. Remember, polishing is a process which takes time and requires that each grit size pad be used properly to achieve a quality finish.
4. Using the 50, 100, or 200 coarse grit pad, remove all rough scratches and cut marks. Smooth the surface as much as possible with these specific grit pads. The smoothing of the surface during this stage of polishing will determine the quality of the finish that will be achieved. After working the area, dry the surface to determine if all large scratches have been removed. Using a lumber crayon or pencil, mark the surface to determine the depth of the scratches remaining.
5. Once all large scratches have been sufficiently removed, the finer grit pads can be used to achieve the quality finish. The fine grit pads consist of 400, 800, 1500, and 3000. If more luster or color from the polished surface is desired, use the extremely fine 5000 & 8000 grit pad.
   
   

The surface should have a high luster or finish. If the surface appears to have small scratches, repeat step 5. In some cases it may be necessary to repeat steps 4 & 5.

Important Points in the Polishing Process:
• Our polishing pads are designed to be used solely with water to minimize the wear on the pads and prevent dust. (The use of water acts to cool the polishing pad material, flush away grindings, and eliminate dust). You can use our dry polishing pads to polish the stone with now water. Always wear eye protection at all times.
• Never skip grit sizes during the polishing process. Skipping grit sizes will result in an unsatisfactory finish to the stone.
• Diamond polishing pads wear out prematurely due to the overworking of the material or by not using a sufficient amount of water. Do not use an excess amount of water.
• Failure to spend adequate time polishing with each grit size pad will result in an unsatisfactory finish.
• Use a 4" Diamond cup wheel to plane down uneven surfaces and knock off saw nubs.

 

We ship to the 48 continental United States -  $4.80

Alaska and Hawaii $4.80

Canada Shipping - $18.00

ALL shipments are sent FEDEX (We can not ship to PO Boxes)

Buyer is resposible for all broker and custom charges for Canadian Shipments.
*Hawaii, Alaska, and  Puerto Rico residents please email for shipping quote.