RC Speed Boat 51" Gas special hull Very Nice!

This ad is for a 51 inch deep v hull called the Stinger deep V. This is a vinyl ester hull,these are not made from cheap polyester resin. I make these hulls in small quantities. These are not available anywhere else. This is not a auction its a fixed price ad and this boat can be bought instantly at any time by anyone. I have shown several pictures during the construction. The transom and engine stringers are top quality aircraft grade plywood. I add the extra tabs of fiberglass at the rear and front of the engine stringers to make them absolutely stiff and secure. The rear ride portion of the hull has a carbon fiber and kevlar hybrid cloth the additional strength in that area. This hybrid was chosen for its properties,the hybrid is better suited to this purpose than regular carbon. The resin used in making these is 50.00 a gallon vinyl ester resin,its superior to polyester fiberglass resin. These are much stiffer and stronger than a typical polyester resin hull. Almost all other boats are polyester resin. The red deck is gelcoat not paint and the pictures do not do it justice. You could shave in the finish. The entire boat is straight and well built. The stringers are spaced 5 1/8" apart,the extra 1/8" makes life a lot easier when it comes time to install the engine. The deck is glassed onto the hull and several layers of fiberglass tape added inside to make it a very strong connection. Everything is hand laid and hand fit together,definitely not a typical mass produced boat. Very good rough water boat. These are a lot stronger than they look. It weighs the same as a polyester boat but the molecular structure of the vinyl ester makes it a superior boat. These are designed for zenoah engines and built to handle rough waters. I can make this hull in other colors,message me if you would like one in a different color. I built the molds for this hull and you wont find anything like it elsewhere. Feel free to ask any questions. The shipping is high because this falls into the oversized item category. I will ship to Canada but will require a address to get a accurate quote,please ask before buying. Thank you.

---

On Nov-02-09 at 14:25:52 PST, seller added the following information:

There is a build thread of me making this boat on Jims RC boat dock under the build section. This thread details every step over a period of weeks with lots of pictures. The thread is titled building a new mono honestly. Here is the address you will have to copy and paste it into your browser. http://www.jrcbd.com/showthread.php?t=32007