**Check out our eBay Store, Guitar Tools Frets n Supplies Guru for all popular sizes of Fretwire in stainless and hard nickel silver, and all of the top notch tools, tips and supplies you'll need to do it right.

---

Click on any photo for a larger image

---

Our long-wearing fretwire gives you:

• A smoother, lower friction surface for easier bends.


• Better sustain and precise intonation that last longer. Set it up once, play on it longer!


• Save $250-$400 by doing it yourself. If you've priced a fret job by a good shop, you'd know I'm not exaggerating. When added up over years of playing, you could easily save thousands!


• Custom-radiused for your fingerboard, FREE!


• We'll help you take the guesswork out of the process with free tutorials, video and pics. Have a question about the process? Just ask! It's really not as hard as you may think. You can be well on your way to a first class fret job!

---

Here we have 5 feet of hard German Nickel Silver fretwire, more than enough for a complete refret of your electric or acoustic axe. It measures .047" tall by 104" wide.

I consider this the perfect all-around size - enough height to keep your fingertips/ fingernails from dragging on the wood, and enough width for smooth bends (without killing sustain or intonation).

This is the finest German made precision wire available. It measures .047" tall by .104" wide.

Before we ship it to you, it's

Custom radiused to perfectly fit your fingerboard at no charge. Yep, that's free!

Just let us know what radius your board is, or if you don't know, tell us the model of your guitar and we can probably help you figure it out. Don't buy into the "logic" of buying straight fretwire so you can bend it by hand (or buy/make a fretwire bender, lol).

The perfect radius is actually slightly more bend than your fingerboard - this helps to keep the fret ends from springing up. Just let us know which radius you prefer.

In my experience, most other fretwire that I've tried (for some reason) has too narrow (.031-.032") a fret tang (the part that fits into the fret slot). So I spent some time researching and found that there's a factory in Germany that makes this size wire with a decent size tang (.036-.038" including "barbs"). This is particularly useful on guitars that are being refretted, or have been refretted more than one time.

I had to step up for a boatload of this stuff, so I'm offering the extra to you for cheap-cheap.

**Gibson players take note:

Your "vintage" dunlop 6130 size low and fat frets, when NEW are the same size as worn out jumbo frets.

They start out at only .036" tall, and once you level them a bit, you're down in the low .030's... add to that some wear and you've got a sluggish, hard to play guitar, with no room for future wear or fret leveling. The fretwire listed here is the perfect replacement for vintage Gibson frets, with just enough extra height to keep your fingertips from dragging on the board.

This is one of the single best upgrades you can make on a Les Paul, SG, or 335. And we have it in either stainless or hard nickel silver.

---

Want to save over $5 on your purchase?

Shipping is FREE on your second length of wire! For 3-4 lengths, just add $1, for 5+ lengths, just add $2.

International shipping is only $10 for 1-3 lengths of wire, and it usually takes only 4-6 days to get to you.

---

Ready to re-fret your own guitar, or do any leveling and polishing? Protect your prized axe, save time, and make the job a lot easier with these nifty fingerboard guards pictured below.

They are made of durable .010" stainless steel, with a slot machined in the middle to barely allow the fret to peek through during all of the sanding and polishing processes, and if you're paying attention, you'll pick up on another pro fret leveling trick...

And these eliminate the need to mask off the entire fingerboard, where you run the risk of pulling the finish right off the neck. These have been one of my shop's biggest time savers!

Check out our other auction and get yourself a couple of these.

Free shipping on these with the purchase of one or more lengths of our fretwire! Just purchase them in our other auction and we'll combine the shipping with your fretwire.

We now offer all of the direct-from-my-workbench tools and supplies that we've developed and been using here in the shop for years... you'll get brand new, even more refined versions of course! See pics of just some of them below. One particularly cool item is the

Ultimate Precision Sanding Beam/Fret Leveler pictured above.

It is precision ground, then lapped in on a granite surface plate that measures to within .0001" (that's one ten-thousandth of an inch!), and it comes with both 100 & 240 grit premium Redline XL paper already included. Available in 8", 16", and for you bass players, 24". It even comes with plastic end caps, so you don't damage any pickups or tuners by running into them.

**Insider secret: We fill ours with rice to give it extra weight. It makes short work of any fingerboard or fret leveling task

These tools give a huge bang for the buck, and blow anything else available out of the water.

---

This will fit fits Fender Strat Tele Telecaster Gibson SG Les Paul Ibanez Jackson Carvin PRS Paul Reed Smith RG Jem Kramer Rickenbacker Hamer Dean BC Rich Schecter Epiphone Tom Anderson Andersen studio sg de luxe 335 345 hummingbird stratocaster special danelectro carvin ernie ball

International shipping is $12 usd for 1-3 lengths of fretwire, and usually arrives in 4-6 days.