RC Plane 45A Brushless Programmable Data Recorder ESC

Eurgle 45A Brushless Motor Programmable ESC with Internal Data Recorder
Model Number : rcps41817_045

You are buying a brand new Eurgle 45A Brushless Motor Programmable ESC. The main feature of this ESC is which comes with an internal data recorder. It may record the voltage, rpm, current, temperature and percentage of the throttle. If you want to get the data during flying but weight is a critical issue to you, internal data recorder is exactly what you need! If you buy the data recorder separately, normally it will cost you at least US$100, but now, it is included with with the ESC!

Also, it is similar to the other ESCs in the market. You may either program it via handy programming card or by PC via USB adaptor. Both of them are also optional.

It is very easy to setup and program. Most of the settings are auto-detected. Also, it is made with higher quality micro processor and more FETs with lower internal resistance.

Features:

	Microprocessor controlled
	Integrated the function of flying data logger, could recording the flying data as: Current Voltage Temperature RPM Power Throttle Travel
	Programmable the parameters of ESC through USB cable connected to computer
	Upgradeable the firmware of ESC through Internet
	45A continous(55A surge)
	Up to 10 cells NiMH/NiCad or 2~3cell Lithium-polymer
	High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
	BEC:2A (Linear BEC)
	Support 3 micro servos
	Programmable low voltage cutoff
	Programmable cutoff types(soft cutoff/hard cutoff)
	Programmable brake type(disable/soft brake/hard brake)
	Time advance programmable (low/standard/high)
	Programmable current limiting(very ensitive/standard/insensitive/disable)
	Governor mode(low rpm governor/high rpm governor)
	Programmable startup type(very soft start/soft start/fast start)
	Thermal Protection(100 centigrade)
	Apply to most of inrunner and outrunner brushless motors.
	No complex programming, auto adapt work mode.
	A LED (flashes) indicates full throttle.
	Runs motor in forward or reverse by swapping any two motor wire connections.
	Safe “power on” arming program ensures motor will not accidentally turn on.
	Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
	The ESC is disabled when the voltage is over 15v at power-on.

Specification:

Item(s) Included:

	Eurgle 45A Brushless Motor Programmable ESC with Internal Data Recorder
	English Manual