4" Wet Polisher Granite Marble Polishing Pad Set w/ DVD

Included:

• 1 qty. Electric Water Polisher
• 1 qty. 4" Wet Polishing Pad Set (50 grit, 100 grit, 200 grit, 400 grit, 800 grit, 1500 grit, 3000 grit and Buff.)
• 1 qty. 4" Velcro Backer Pad
• 1 qty. How To DVD (Explains how to go about polishing your stone)
• 1 qty. 1-3/8" Wet Diamond Core Bit

These pads are to polish Granite or Marble stone. You can make a nice smooth finish for your stone.

Here is some additional information:

Our's polishing pads are designed to achieve a monument quality finish on all straight or shaped surfaces. The unique design of the polishing pads allow for rapid and even removal rates with minimal effort. When used correctly, these pads provide a clear advantage over all other polishing methods. **(Max. RPM for the pads is 4500)**

Polishing Steps:

1. Cut or shape material to the desired surface or pattern using either a diamond blade or diamond cup wheel.
2. Using a clamping device, secure material to be polished to a proper work surface.
3. Remember, polishing is a process which takes time and requires that each grit size pad be used properly to achieve a quality finish.
4. Using the 50, 100, or 200 coarse grit pad, remove all rough scratches and cut marks. Smooth the surface as much as possible with these specific grit pads. The smoothing of the surface during this stage of polishing will determine the quality of the finish that will be achieved. After working the area, dry the surface to determine if all large scratches have been removed. Using a lumber crayon or pencil, mark the surface to determine the depth of the scratches remaining.
5. Once all large scratches have been sufficiently removed, the finer grit pads can be used to achieve the quality finish. The fine grit pads consist of 400, 800, 1500, and 3000. If more luster use the buff pad.
   
   

The surface should have a high luster or finish. If the surface appears to have small scratches, repeat step 5. In some cases it may be necessary to repeat steps 4 & 5.

Important Points in the Polishing Process:
Our polishing pads are designed to be used solely with water to minimize the wear on the pads and prevent dust. (The use of water acts to cool the polishing pad material, flush away grindings, and eliminate dust). You can use our dry polishing pads to polish the stone with now water. Always wear eye protection at all times.
Never skip grit sizes during the polishing process. Skipping grit sizes will result in an unsatisfactory finish to the stone.
Diamond polishing pads wear out prematurely due to the overworking of the material or by not using a sufficient amount of water. Do not use an excess amount of water.
Failure to spend adequate time polishing with each grit size pad will result in an unsatisfactory finish.
Use a 4" Diamond cup wheel to plane down uneven surfaces and knock off saw nubs.