50 second USB sound / voice recording module

This module plugs directly into the USB port of your PC. Then use the free software to record up to 50 seconds of mp3 or wav file to this module. Comes with batteries and speaker ready for use.

Features
Up to 50 seconds of re-recordable voice message (8K sample rate)
Use USB type-A male connector for direct plug into USB port of PC (USB1.1)
Easy to transfer software for windows of MP3 or WAV audio file.
Choice of 8K or 12K sample rate.
50 seconds non-volatile recordable IC.
Operating Voltage 4.5V (3 x AG10 batteries included)
Operating Current < 50 mA
Standby Current < 5 uA
Push switch for playback / stop
Speaker 40mm metal housing mylar speaker (included)

 Click here for USB2M Data Sheet

Click here to download the USB2M software

Important notes about the VDM Writer software:

• Make sure to install the software first, before you plug the module into your USB port for the first time.
• When running under Windows Vista be sure to right click on the VDM Writer Icon and choose to "Run as administrator"

Tips on using the USB2M recorder:

• Be sure to remove the plastic tab from under the switch, by pulling it out. The plastic tab is to prevent accidental playback during shipping of the module.
  

---

On Jul-19-09 at 12:25:59 PDT, seller added the following information:

Dimensions:
Main board: Excluding USB connector: 1.7" x 1.13"
Including USB connector: 2.25" x 1.13"
Battery board: 2.25" x 0.8"
speaker: 1.6" (diameter)

---

On Jul-24-09 at 18:06:35 PDT, seller added the following information:

This device can be programmed as either one shot mode or looping mode.
ONE SHOT MODE: Recording will play once and then stop. Play button must be pressed again for the recording to play again.
LOOPING: Recording will repeatedly pay until play button is pressed a second time.