RC 3A 5v Switchable Brushless Motor MU-061 ESC UBEC BEC

Turborix 3A External Switchable MU-061 U-BEC
Model Number : rcps81706_ub

You are buying a Brand New Turborix 3A External Switchable MU-061 U-BEC which is designed and produced by dual switching technology and double sides SMT. The features are low power consumption, high efficiency, wide range of input voltage. This BEC is a switch-mode DC regulator separated from ESC (ESC-Electronics Speed Controller for brushless motor), it will take high voltage (5.5v-42v) power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servos.

If you are using a speed controller with a built-in BEC, it will very likely have only a limited ability to supply power to your receive and servos without overheating. If you have a relatively high voltage battery pack or have heavy servo loads, you should consult the ESC specifications to determine what the stated recommendations or limitations are. In general, if you are using a 4s Lithium pack, or more than a 12-cells NiCd battery, you should consider using this UBEC. In such a case, the built-in BEC of ESC only supports 2 servos, so it is not suitable for RC helicopter and big aircraft.

Features:

	This UBEC is an advanced switching regulator, provides over-current and over-heat protection function, and the witching frequency is 300KHz. The max efficiency of this chip is 92%.
	The smallest size and the lightest weight.
	Don't worry about the polarity of battery pack, if the polarity is not correct, the UBEC can't work, but it will not be destroyed. What you need to do is just swap the battery pack polarity.

Specification:

Operating Instructions:

Precautions:

	Make sure input polarity is correct, or U-BEC will be damaged
	Short circuiting output will damage U-BEC
	Do not operate at high current without proper cooling

Item(s) Included:

Turborix 3A External Switchable MU-061 U-BEC