NEW! Hobbico NexSTAR 46 Trainer ARF .46 68.75

STOCK# - HCAA2025 New and unused. In the original manufacturer packaging.
        This is the radio controlled  glow powered  Almost Ready-to-Fly 
                    Hobbico NexSTAR .46 trainer airplane.
                         For Beginner Modeler/Fliers.

   ** This version does not include a radio  pilot assist link  engine  **
         NexSTAR Simulation Software  and the learn-to-fly guarantee.

                     With such features as SpinControl
              Airfoil Extensions  SpeedBrakes and Training Flaps
         no other trainer offers so much help for the first-time pilot.

FEATURES: Construction: Balsa and plywood
          Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
            alignment and includes a built-in aileron servo mount  wing halves
            are joined with a steel rod.
            Flat bottom high mount configuration
            One-piece  all wood precision airfoil with SpinControl Airfoil
            Extensions that provide lift even in a stall to keep the
            NexSTAR level and the pilot in control.
            PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
            bolt (GPMQ4402) a rubber retainer and pivoting channel absorb minor
            jolts of normal use  more severe jolts cause the wing to separate
            from the fuselage and escape the full force of impact.
          Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
            section of wing near fuselage and hold airspeed to a minimum to
            insure smooth landings  removeable as pilot skills increase
          Covering: Polyester based heat shrink  color scheme is White and Red
            with Silver accents. True Red TOPQ0227
          Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts 
            (US Patent #6 886 780) lock in place with a snap and provide the
            strongest landing gear of any trainer  also easily removeable
          Aileron Control: Requires single standard size servo  wings are built
            with dual aileron servo trays for future upgrades as skills
            increase  can also be equipped with flaps
          Tail Mounting: EasyAlign System guides parts into place automatically
            in perfect alignment without tools
          Building Time: Ready to fly in 3-5 hours
          Warranty Period: Hobbico guarantees this kit free from defects in
            both material and workmanship at purchase date. This warranty
            does not cover any component part damaged by use or modification.

INCLUDES: Pre-built and covered wings  fuselage and tail assemblies 
            pre-bent main landing gear with three 2   (70mm) foam main
            wheels  steerable nose gear  IsoSmooth aluminum and rubber engine
            mount  9.1oz (270cc) fuel tank  2   (57mm) red plastic spinner
            pushrods  linkages  and photo-illustrated instructions

REQUIRES: Radio: 4-channel
          Servos: Four standard size (1-throttle  1-rudder  1-elevator 
            1-elevator)
          Engine: .46 cu in (7.5cc) engine (*see comments below)
          Model airplane fuel
          Building and field equipment
          Charging Rx and Tx batteries

SPECS:    Wingspan:      68.75      (1746mm)
          Wing Area:    722 sq in    (46sq dm)
          Weight:         6.5lb-6.75lb (2835g-3060g) ready to fly
          Wing Loading:  20-21 oz/sq ft (61-66g/sq dm)
          Length:        56        (1420mm)
          Airfoil:         High-Wing
          Center of Gravity:  3-3/16  (81mm) forward limit
                              3-9/16  (90mm) aft limit from the wing s leading
            edge at the fuselage sides
          Control Throws-
            Elevator: Up & Down       (13mm)
            Rudder: Right to Left     (19mm)
            Ailerons: Up              (13mm)  Down 3/8  (9mm)

          Right Thrust Angle-3 
          Down Thrust Angle-4  wing respect to wing incidence

COMMENTS: Wings are equipped with dual aileron servo trays if dual aileron
            servos are desired. If you wish to use flaperons you will need to
            upgrade your radio system to 6 channels. The instruction manual
            list parts needed and information to perform these conversions.

          The metal straps described on page 13 for the engine mount are not
            included with the kit.

          If a replacement fuel tank is needed  an 8oz (240cc) tank like
            SULQ1439 can be used. Some minor modification may be needed as this
            is not the exact shape of the original tank

         *Because the .46LA dimensions are different than a bearinged engine 
            it will not work in this plane unless modifications are made. You
            will need a different engine mount. Depending on which engine
            mount is used  you may need to add aprox. 1/4  to 3/8  plywood
            to the firewall to extend the prop forward enough to keep it from
            contacting the fuselage.

         *If a Tower .46 is being use  you will need to use an muffler
            extension. The Dubro 699 Muffler Extension DUBG1319 will work fine.

         *The steel wing joiner rod used in this model can be substituted with
          the the rod from the Hobbico AviStar/SuperStar Select(HCAA3722)

                                                               updt jxs 3/08/04
                                                             update mcw 5/27/04
                                                                updt mcw 6/4/04
Feedback: Please contact us first if you feel that you cannot give us
ratings of 5 in all categories. eBay now punishes sellers that get
scores less than 5. We are sure we can work out any issues that might
come up.  Thank you in advance for your feedback!