Universal Bedlegs 5" King Get Rid of Metal Bed Frame

No more metal frames, with their expensive shipping and unsightly appearance...

5" tall Size: King
Stylish Universal Bed Legs
No more need for ugly metal frames!
Choose from Walnut or Sand color.
Please specify at time of purchase what color you prefer in the comments.
King have 12 Legs 

 Head Board Brackets available upon request for $16.00 a pair.

Center support is necessary to keep your mattress from sagging in the middle. By providing enough support to equally distribute the weight on the mattress, your
mattress won't sag- and will not need to be replaced as soon as a unit without center
support.

THE BEDLEGS ARE AVAILABLE IN A VARIETY OF HEIGHTS IN BOTH A
(SAND) AND WALNUT (BROWN) FINISH. COMPLETE SETS OF BEDLEGS ARE
AVAILABLE FOR KING SIZE BEDS

The Universal Bed Leg® System easily attaches to the box spring or foundation
utilizing two components: the threaded base plate and the bed leg. The threaded base plate installs directly onto the box spring and the leg simply screws into the threaded area of the base plate completing the installation. Once the base plate is secured to the boxspring using a power screwdriver, consumers can then very easily resize the height of their beds without any tools by simply attaching a different size leg.

Detailed Installation Instructions:

IMPORTANT: Verify that your side rails meet the minimum requirements of a finished width of no less than 2 1/4". We recommend the box spring side and center rails be of high quality kiln dried wood of 1" x 4" (finished size of 3/4 " x 3 1/4"). For these installations the outside set of screw holes should be used. With rails of less dimension, the inside set of screw holes ( 1 1/4" o.c. ) should be used. Minimum actual rail dimension must be 2.1/4". Verify that your boxspring rails are of sufficient size to adequately accept the Universal Bedlegs^® base plate as indicated.

STEP ONE: Align the Universal Bedleg^® base plate so that it is six inches from the top of the boxspring, as indicated in the diagram on the left. The side of the base plate with 2 holes should face the outside edge of the boxspring, as indicated in the diagram on the left. Determine which set of holes you will use by measuring the width of your boxspring rail. If your rails are a finished width of 3/4" x 3 1/4", use the outside set of screw holes. For rails of lesser dimension, use the inside set of screw holes.

STEP TWO: Using a power screw driver, mount the plate to the boxspring using the supplied hardware. use only 4 screws per plate. 

STEP THREE: Hand twist the threaded leg stem into the base plate.

Congratulations, you have successfully installed the Universal Bedleg^® System!

Q. How can a plastic leg be as strong as a metal bed frame ?

A. Advances in plastics make it possible. New cars aren't made of metal. They're plastic. And unlike metal, plastic doesn't require smelting pots and produces waste that is recycled back into other products.

Those with young children looking for safe products will like knowing that Universal Bedlegs reduce much of the risk of injury while rough-housing in the bedroom. No more cuts, bruises, or more serious injuries caused by dangerous metal bed frames. You can elevate the height of the bed by ordering the 7". You'll increase the storage space for all their games, athletic equipment, dolls, and toys as they grow into young adults.