SWX Subwoofer Crossover - KICKER Module! Upgrade! LOOK

KICKER SWX

Subwoofer

Module

For KICKER DX XS ZR & ZX amps

Dx350, Dx700, zr120, zr240, zr360, zx460,zr600,zr1000, xs50, xs100.

This will also work in older amplifiers that require a KICKER crossover module with some modifications.

The Modification is you will need to use the back side of your old module (just take out 1 screw and replace) OR cut the back of this one so it will fit in the docking port. SS , SI , and X for example.

Kicker's Active Signal Processing Modules mount in the module docking port of Kicker's ZR, ZX, XS, and DX series amplifiers. The SWX Subwoofer Crossover Module allows you to select one of these crossover points — 60,  or 100 Hz.

Steep 24 dB/octave crossover slope minimizes "bleed-over," so your soundstage stays clearly in focus. The module's two dip switches let you switch between:

Sending the filtered signal (high- or low-pass) to the Kicker amplifier in which the module is installed (the host amp)

Routing the crossover's signal through the host amplifier's preamp outputs to a second amplifier

High-pass to one amp, low-pass to the other.

NOTE: THIS MODULE WORKS ONLY WITH KICKER AMPLIFIERS THAT USE THE MO- DULAR DOCKING SYSTEM! This unit provides a crossover point between the subwoofer and midbass frequencies. By changing chips (provided) you can select crossover points of 60, or 100, all at a slope of 24dB. The two dip switches in the module allow you to do the following: Internal Amp Switch = Allows you to direct high or low pass to the internal amplifier (eg, the one you installed the module in) External Amp Switch = Allows you to direct Low, High or All pass to the output RCA jacks of the amp you're installing the module in. Subsonic Filter Function= On the ASW module, if you install no micro chips and set the input switch to high pass, the module will insert a 24dB/octave cutoff at 25Hz. Tech note: Although the chips look like microchips, they are simply resistors, so you don't have to worry about static charges zapping them.

WHAT DO YOU GET?

ONE SUBWOOFER MODULE WITH

2 PAIRS OF CHIPS (60

 AND 100Hz)

MANUAL

MODULE CONTAINS AN EXTERNAL AMP AND INTERNAL AMP DIP SWITCH

The manual reports that 80 Hz is also available But this set does not contain 80Hz chips- you will receive 100hz and 60hz chips only. All 100% new

These Modules are Bulk Dealer packed and Do not have an SWX label on them. They come as pictured.

The Manual for this module is included

I pack and ship these very carefully so that no damage will occur.

Payment:

A pay now button will be included on your Invoice for pay pal. 

If you have an international address - or outside The USA - you must email for a shipping quote.

Thanks For choosing KICKER for your winning System!