 |
| |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
Guarranted Fastest Shipping by 2~3 Days USPS Priority Mail.
We Combine Shipping with other item purchase and give you additional discount.
We prefer Paypal payment(Confirmed address and Verified accounts only).
We welcome wholesale or dealer inquiry for products. |
| Product Title |
|
Continuous Ink System for:
Epson R200/R220/R300/R320/RX600/RX500/RX620 |
| Product Photo |
 |
|
| Product Description |
|
- No more Ink Cartridges purchase, No more Cartridges replacement. Refillable ink cartridges/ink reservoirs enable countless refills.
- Pre-filled with 160 ml x 1 colors & 125 ml x 1 colors & 100ml x 4 colors = 685 ml of premium UV Resistant dye based Ink.
- Quick and Easy installation. You will be printing in minutes.
- 80% Saving on individual Inkjet Cartridge.
- No Leaking or Clogging
- Pre-Assembled
- Environmentally Friendly
- Permanent Chip. Auto-reset chipsets automatically reset the cartridges so there is no need to utilize a chip resetter nor take the cartridges out of the printer to refill.
|
| Product Detail |
|
The CIS(Continuous Ink System) consists of a high-capacity ink reservoir (same as using between 8 ~ 10 ink cartridges per color) that is attached to a cartridge via secure tubing. The tubing acts as a vacuum to extract ink from the reservoir and keep the cartridge full of ink. Because of the large reservoir capacity, you can print for an extended period of time without running low right away. There is a red line on the reservoir to indicate when it is time to refill.
Each CIS comes complete with easy-to-follow instructions, ink, and all accessories needed to successfully use the system. The included UCI cartridges have a permanent smart chip already installed, which will automatically reset itself when your printer power is turned off (for 5 seconds) and turned back on. No mess! No leaking!
Not only do you get the Unit-kit Continuous Ink System but you will receive an abundance of ink to get you started. - 6 Color Assortment includes Black in 165ml bottle, Yellow in 125ml bottle, Cyan, Light Cyan, Magenta and Light Magenta in 100ml in bottles.
After using ujp the ink in reservoir, you can refill the resivoir with a refill kit sold separately. The refill kit contains SIX bottles with easy pour spout.
For your convenience, there is a filter built into the ink tank, to prevent outside agents from contaminating and/or affecting the quality of your prints.
|
| Additional Information |
| OEM CArtridge No. |
- T048120:Black/T048220:Cyan/T048320:Magenta/
T048420:Yellow/T048520: Light Cyan/T048620:Light Magenta |
| Instruction Manual |
| Instructional Manual Continuous Ink System for use in Epson R200/R220/R300/R320/RX600/RX500/RX620 |
| Before using this product, please read and follow the instructions. After opening your package, make sure to check that all the accessories shown in figures 1-1 through 1-3 below are enclosed. |
| Conduct Parts Check: |
| 1.Accessories |
- Continuous Ink System (1)
- Air breather plugs (6)
- T shape Adhesive pad (1)
- Syringe(1)
|
|
|
| 2.Set-Up Continuous Ink System(CIS) |
|
a. Before installation, lay out all your parts in front of your printer.
b. Check your system for any leakage, and make sure your tubing system is tightly connected and straight.
c. Place the CIS on the right hand side of the printer as shown (Fig. 2-1) and keep it on the same level surface as the printer.
d. Install the Air Breather widest end first, into the ink reservoir tank making a snug fit however make sure not to push them in to tight as it could crack the tank (Fig.2-3). Also make sure when removing the air breathers from the tank
Caution : Make sure not to push the breathers too tight as it could crack the tank. Also when removing the air breathers from the tank use caution to avoid cracking. |
|
|
| 3.Cartridge Installation |
|
a. Unplug the printer.
b. Open the cartridge carrier cover ensuring that the colors correspond, push the cartridges all the way down in compartment just as you would be the original cartridges (Fig.3-1 & 3-2). |
|
|
| 4.Tube Adjustment and Positioning |
|
a. Place the tubing line with 45 degree angle as shown (Fig. 4-1 & 4-2), and close the cartridge carrier cover.
b. Make sure the tubes are not twisted and are straight completely straight. For regular printer model :
*** Adjust tubing between cartridge compartment and T shaped adhesive pad to correct the length; allowing enough room for the cartridge to move back and forth freely (Fig. 4-3).
*** Place the second adhesive pad on the right side of the printer and adjust the tubing line accordingly. |
|
|
|
*** The tubing line adjusts as shown (Fig. 4-4 ), allowing enough room for the cartridge to move back and forth freely. |
|
|
|
| |
| d. Close the cover and turn on the printer and make sure the system moves smoothly.
|
| 5.Refilling Ink |
|
When the ink levels reach the indicator (sticker on the ink tank with red line Fig. 5-1) the ink tank has reached its low level line and needs to be refilled.
Follow these steps:
1.Gently remove the air breather plugs in order to have more filling room.
2 .Remove the rubber plug from the filling hole and refill the proper color of ink into the corresponding ink tank (Fig 5-2).
3.Make sure you use the specially designed Low Foam inks for the CI System as they are specifically designed for optimal results. NOTE :When removing the CI System, remove cartridges and put tape or a napkin over dispensing hole. Printer and ink tank MUST remain at the same level (not higher and not lower). |
|
|
| Attention :
1. After installing the CI System, do not remove the cartridges.
2. When you are printing do not move the ink tank up or down. Keep it stable and at level with the printer.
3. Store at 15-35 degrees Celsius.
4.The ink and cartridge flow have been designed and tested to function as a unit. We recommend you use specially designed ink for the CIS for optimal results. Caution:
1. Do not ingest ink and keep out of reach of children.
2. Do no leave under sunlight or in extreme weather conditions.
3. Do not drop ink tank or handle roughly.
Thank you for purchasing the Continuous Ink System: We hope you found this manual useful.
|
| |
| | | |
|
|
|
|
  |
  |
  |
  |
 |
|
- Lamicci_com is the ultimate source for Printer Ink System, Bulk Ink Products, Blank Media and Memory product, CD and DVD Duplicator System and Disc Printer. We provide highest quality products from a large selection of name brands with competitive pricing.
- Our goal is to provide the highest quality products at best possible price with timely and accurate service.
|
|
 |
|
- We prefer Paypal payment. (Confirmed address and Verified accounts only)
- We do accept Visa, Master Card, Paypal and Company Checks for repeat order customer
- We don't accept International Credit Card, International MO checks.
- No CODs
- Question for all other payment, please E-mail to ebay@lamicci.com
|
|
 |
|
- We do ship to Confirmed and Verified Paypal address.
- All order will be shipped within 24 hours on normal working day.
- In case of USPS Priority mail, it will take 2-3 days and First class mail, 3-4 days. Or UPS 3-5 days. But there can be delayed by the carrier in some rare case. - We send shipping notification with tracking number every time we ship out the product. Please check your E-mail after your purchase for delivery information.
- We do ship to Hawaii, Alaska, Purto Rico
- For other country than Canada, please contact ebay@lamicci.com as it depends on each product.
- We may refuse to ship out the order, if address provided is not valid in our labeling system.
- We are not responsible for international destination local tax and duties.
All international buyers are responsible for their custom clearance charges and duties. |
|
 |
|
- All sales are final. No return will be accepted, except DOA or functional problem.
- In case of you found problem with our product, you have to get RMA from us first,within 14 days of your purchase invoice date. After 14 days, all manufacturer's warranty will be applied.
- We dont accept any return without RMA number provided by us prior to return.
- Return postage is on Buyer.
- In case of refund after product return, original shipping and handling charge is non refundable.
- When you make return, product must be in original condition. In original shipping box, well sealed and protected.
- If we found the returns is damaged during return tranportation, we may hold further credit process.
- Lamicci_com will reserve the right to decide replacement of the product, repair or money back, after receive the return.
- In case of DOA for Duplicator or Ink System product,
Any returns not returned in " like new conditon" including missing original box, packaging material, contents accessories or manuals are subject to a 30% restocking fee. |
|
 |
|
- We offer various wholesale price depend on volume order to the dealers. We also offer direct container delivery price to overseas importer. Please contact ebay@lamicci.comfor more information.
- We may require dealer registration first with valid resale permit and resume, before our quotation,
|
|
| |
| |
|
On Nov-25-09 at 17:02:50 PST, seller added the following information:
SquareTrade © AP6.0
SquareTrade © squaretrade warranty v2.0 |
Back to home page
) 
Lamicci Store
Print
Report item
and your 