FUEL ECONOMY THIS IS HOW I INCREASED MY GAS MILEAGE

In 1934 a Ford v8 coupe was tested with a patented carburetor designed by Charles N. Pogue, and got an astounding 28 miles per pint. Figure it out, that is 224 mpg. The people that tested it said that it performed great in every aspect. There were no harmful emissions .  Charles tried repeatedly to get Detriot to install some of his designs , which were patented and numbered in the 1000s, but they didn't want to.     There are some carburetors that performed better than that even. There are numerous, some patented, some not, but in most the biggest trick is vaporization. Liquid fuel is dumped out the bottom of a carburetor or being sprayed out of the injectors in a port fuel injection engine. This fuel’s vapors are burned and the remainder burns slowly and with a lot of soot or emissions. The raw gasoline liquid will not burn!!!!!

With this in mind i decided to try to build my own setup . I started with a 94 ford  F-150 and a 300 cid engine . i eventually went from 13 - 18+ mpg . This document tells how i did it , and shows  the devise i came up with . My truck had 174,000 miles on it . i think if a guy were to start out with one that was not worn out he could get even better results than i did . THIS SHOULD BE ABLE TO BE MODIFIED INTO MANY OTHER VEHICLES . If you have questions please ask , i would be more than happy to answere them . if you are interested in free heat or extending your diesel fuel , or just need other industrial items , check out my store by clicking on the link below . THIS ITEM WILL SHOW YOU HOW I BUILT MINE.

I OFTEN GET CUSTOMERS THAT ASK IF THIS CAN BE PUT IN A SPECIFIC VEHICLE , OR HOW MUCH IT COST TO BUILD AND ARE PARTS EASY TO FIND .

I HAVE LESS THAN $100 IN PARTS

THERE ARE 2 BASIC PARTS TO THIS UNIT A PVC VAPORISER AND FUEL LINES UNDER THE HOOD , AND THE CONTROLS UNDER THE DASH . 

THE VAPORISER MUST BE BUILT TO FIT INTO ANY AVAILIBLE SPACE LEFT UNDER THE HOOD . THIS IS MOSTLY PLASTIC PIPE THAT CAN BE BOUGHT AT THE LOCAL PLUMBING STORE . YOU ALSO NEED ELECTRONIC FUEL INJECTORS WHICH YOU CAN BUY NEW OR USED .

THE CONTROLS ARE PARTS THAT CAN BE BOUGHT AT MOST ANY RADIO SHACK OR FROM PARTS SUPPLIERS ON EBAY . THESE MUST BE DESIGNED TO WORK WITRH THE SPECIFIC VEHICLES COMPUTER SYSTEM .

BOTTOM LINE , CONSIDER THIS TO BE A - THIS IS HOW I BUILT MINE - AND  ONCE YOU SEE HOW I DID MINE YOU WILL HAVE A PATTERN YOU CAN USE TO BUILD YOURS FOR YOUR SPECIFIC VEHICLE .

http://stores.ebay.com/donna-mike43

Thank you for your time       mike