HPI On-Road Sprint 2 Flux Car with the Corvette Body

This is the 1/10 scale, brushless electric powered, radio controlled, RTR
HPI On-Road Sprint 2 Touring Car with the Corvette Body.

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: 3/16" (4mm) plastic
Drive: Four wheel belt drive
Motor: HPI Warp 5700 brushless motor with Neodymium magnet, oversized
sealed bearings and slotless stator design for smooth linear torque
Radio: HPI TF-1 pistol grip AM 27MHz with steering and throttle trim
and reverse and SF-1 steering servo, transmitter does not have
charge jack
Electronic Speed Control: HPI Flux Motiv sensorless, brushless and
LiPO compatible, Deans male plug
Ball Bearings: Full set, rubber sealed
Shocks: Oil-filled, plastic bodied
Differentials: Planetary gear, sealed
Transmission: Single speed with Flux optimized gearing
Tires: Rubber, vintage street tread pattern
Front, 1.02" (26mm) width, 1.9" (48mm) diameter
Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
Wheels:  plastic 1.7" (44mm) diameter, 1.02" (26mm)
wide
Pinion Gear: Steel 48 pitch
Spur Gear: 48 pitch, composite construction
Body: Polycarbonate painted and trimmed

Bumpers: Front, foam
Suspension: Fully adjustable, extra long upper links with new
multiple mounting positions, and adjustable droop
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

INCLUDES: HPI On-Road Sprint 2 Touring Car with the Corvette Body,
Flux Motiv ESC, Warp 5700 brushless motor, painted body, clear wing
2-ch AM pistol grip radio w/steering servo, decal sheet, DVD and
instruction manual
_
REQUIRES: Radio Batteries: (8) AA size
Battery: 6-7 cell NiMH or 2-cell LiPo with Deans female plug
Battery Charger: NiMH or LiPo compatible depending on battery
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length:     17"   (431mm)
Width:       7.5" (190mm)
Height:      5"   (127mm)
Weight:    2.7lbs (1245g)
Wheelbase:  10.1" (257mm)
Front Track: 7.4" (187mm)
Rear Track:  7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread:  6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)