Deer,Turkey,Fish Feeder - Programmable Clock - Aluminum

SHIPPED DIRECTLY FROM THE FACTORY

     This Spinpro Programmable Clock Feeder automatically spins out feed at the EXACT day(s) and time(s) you set.  You simply select the day(s) and time(s) you want the feeder to activate - up to six times each day, or only once each week.

     A separate 1-1/2 volt N-Cell battery (supplied) powers the clock for up to two years.  This allows you to change the 6-volt power battery without loosing your clock and fed setting times.

     Simply mount this feeder to ANY size bucket, barrel, or drum.  A template, instructions, and mounting hardware are included.  No tools are required to access the feed controls.

     A single feed-control dial allows you to adjust how much feed the spinner plate casts out at the programmed times.  This dial can be adjusted to operate the spinner plate from zero to approximately 25 seconds.

     The spinner plate spins ou about 2 pounds of feed in a 20 foot diameter every 5 seconds depending on the feed type.  Almost any type of feed or grain 1/4" or smaller can be used.

     This Heavy Duty, Welded Aluminum enclosure will not rust.  The motor and electronics are "polarity protected" so you will not destroy the feeder if you accidentally connect it to your 6-volt battery backwards.

     The circuit board electronics are humidity and corrosion protected with a coating called Humiseal.  A good 6-volt lantern battery (not included) will power this feeder for up the 3 months.

     Spinpro also sells rechargeable batteries, battery chargers, and solar chargers.  In addition to a 1-Year Warranty, Spinpro also sells replacement parts and provides and economical service department.