|
Sunrise Telecom HTT Home Test Toolkit
Low-Cost Fiber-to-the-Node Test Kit Simplifies Installation of Video, Data, and Voice Applications
Includes Carrying Case & Full Accessories!
Working Condition: Excellent Condition: Used Warranty: 90 Day Exchange Warranty
Successful video, data, and voice deployments require the ability to perform sophisticated tests quickly, with simple "go/no-go" results displayed for the technician. Sunrise Telecom’s quality test sets simplify installation, speed deployment, and reduce cost-of-ownership, while ensuring that the qualified network and services meet users’ expectations.
The Sunrise Telecom HTT (Home Test Toolkit) is designed specifically for mass-market FTTN use. This innovative product provides automatic "pass/fail" test routines for VDSL2, VDSL, HPNA networks, RF signal, Ethernet, 802.11x wireless, copper loop fault identification, POTS, ground continuity, and in-home wiring identification and testing.
Highlights
- Fully qualifies the home network for data, voice and video
- Identifies impairments
- Ensures connectivity
- Reduces truck rolls
- Simplifies turn up and troubleshooting
- Indicates pass/fail with configurable thresholds
Key Features
- VDSL and VDSL2 VTU-R
- HPNA Analysis
- Cable Test
- POTS
- DC Voltage and Ohm Measurements
- Ground Continuity Test
- Wireless (802.11) Analysis
- Ethernet Link Verification
- PC Utility (Bluetooth)
Benefits
- Low cost
- All-in-one test set
- Go/No-Go service verification
- Rapid installation
- Simple pass/fail display
- Easy-to-use
Specifications
Chipset VDSL Chipset: Conexant Accelity Packet EoVDSL CPE HPNA Chipset: CopperGate CopperStream CG3110
Connectors (Interfaces) VDSL / VDSL2: RJ-11 @ 100W HPNA: RJ-11 and F-81 75W (coaxial) connector Cable Test: RJ-45 POTS/DC/Ohm: RJ-11 Ethernet: RJ-45 Headset: 2.5 mm jack Speaker
VDSL2 VTU-R Features Line Code: Discrete MultiTone (DMT) Standards ITU-T G.993.1 ITU-T G.993.2, Profile 8d and 12a ANSI T1.424 Modem Status Measurements Rate Maximum Rate SNR Margin Capacity Attenuation Transmit Power Delay Link Measurements Counters for CRC, FEC, HEC events Counters for LOS, SEF, NCD, OCD Errored Seconds, Severely Errored Seconds, Unavailable Seconds Retrains Bits/SNR per Tone: Full graphical and tabular display Band Plan Selection: Plan 998, Plan 997
HPNA Receiver/Analyzer Host and Client mode: User selectable Auto-discover HPNA stations and MAC addresses Auto Test between user selected stations Data Rate Power Level Signal-to-Noise Ratio (SNR) Transmit and Receive Packets Packet Loss User configurable Packet count and length Test coaxial and twisted pair HPNA networks
Cable Testing Wiremap Wire mapping for RJ-45 8-pin twisted pair cable Maximum cable length: 500 ft /150 m Displays connected, open, short, and map Cable Loss (Coaxial and Twisted Pair) Test Signal: 7 and 14 MHz Diplexer Verification Provide estimated cable length (Twisted Pair Only) Cable ID (HT T-ID-5) Connectors: RJ-11, F-81 coaxial Provide termination for cable identification Wiremap Probe (HTT-WP) Connectors: RJ-45 and F-81 coaxial Uses 2 × AA batteries Auto Shut Off: 5 minutes
POTS/Caller ID Loop Start, DTMF dialing, Caller ID Talk / listen via headset, listen via speaker DC Voltage Range: 0 to ± 200 Vdc Ohm Measurements Range: 100Ω to 1 MΩ Tone Generation Frequency: 570 Hz Ground Continuity Test Range: 0 to 10 kΩ Accuracy: 2% ± 1Ω (0 to 1 kΩ) 5% (1 kΩ to 10 kΩ)
Wireless Detect 802.11 b/g SSID Signal Strength Channel Identification MAC Address Identification Detect WEP 64 and 128 bytes encryption
Ethernet Link Status Link Speed (10/100M, Half/Full Duplex)
PC Utility Bluetooth Configurable Threshold Criteria and result download (CSV)
|