NEW 60'' TORO ZERO TURN LAWN MOWER ENCLOSED PACKAGE

 NEW

TORO 60'' ZERO TURN ENCLOSED TRAILER PACKAGE DEAL

PACKAGE DEAL INCLUDES

• NEW 60'' TORO ZERO TURN 27HP KOHLER ENGINE MODEL# 74292
• NEW  7 X 12 ENCLOSED TRAILER WITH DROP GATE AND SIDE DOOR V-NOSE 3500LB AXLE
• NEW KAWASAKI TRIMMER MODEL# KTF27A
• NEW KAWASAKI BACK PACK BLOWER MODEL# KRB300A
• NEW SET OF TRIMMER RACKS HOLDS 3 TRIMMERS COMES WITH LOCKS

New fully assembled with full Warranty!

	27 HP Engine	Kohler® Command Pro
	Air Filter	Dual Stage Canister
	Cutting Deck	7-gauge 60" deck with reinforcing deck guard
	Spindle Housings	Cast iron with 9-3/8" base
	Spindle Bearings	Ball bearings
	Blades	1/4" thick alloy steel
	Blade Tip Speed	18,500+ ft/min
	Height of Cut	1-1/2" - 5" in 1/4" increments
	Discharge Chute	High-performance rubber
	Carrier Frame	2" x 2" x 3/16" tubular steel
	Ground Speed	8.5 mph forward 5 mph rev
	Hydraulic Pumps	Hydro-Gear 10 cc/rev
	Hydraulic Wheel Motors	Parker 14.5 cir, 1-1/4" tapered shaft
	Hydraulic Fluid	Premium synthetic
	Drive Tires	24" x 12"-12"
	Caster Tires	13" x 6.50-6" 4-ply smooth pneumatic
	Steering Controls	1-5/8" dia. levers; adjustable
	Fuel Capacity	Gas: 12 gallons
	ROPS	Folding; standard

The industry's toughest spindle assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

7-gauge, high-strength steel

Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength), the deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the deck has more than enough capacity to handle the most demanding conditions.

A flat, crisp cut with precision blades.

1/4" thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.

FEATURES

• Top-performing Kawasaki engines provide high air volume output
• Delivers big power in a compact design
• At just 13.2 lbs., it’s easy to operate comfortably during the longest jobs.
• Impressive power-to-weight ratio
• Specially designed padding and harness
• High performance felt air filter
• Large translucent fuel tank for easy reads
• Noise-minimizing features, including plastic engine shroud and fan casing, and muffler with glass wool lining
• Large handle for easy portability
• Lifetime electronic ignition module warranty

SPECIFICATIONS
Fuel Tank	8 gallon
Max Air Volume (with pipe)	295 cfm
Max Air Volume	490 cfm
Max Air Velocity	150 mph
Carburetor	Diaphragm
Plug	NGK BPMR6A
Net Weight	13.2 lbs (6.0kg)
Dimension	12.6" x 13.8" x 14.6" (320 x 350 x 370mm)
Noise Level (At 50 ft per ANSI)	68 dB(A)
Throttle Type	Tube Mount

** not available in California.

PARTS CATALOG

FEATURES

• Kawasaki TJ027E engine
• Lightweight, low noise, low vibration and ideal balance
• Ergonomically designed cutter guard
• Gear reduction drive head
• Lifetime drive shaft and electronic ignition module warranty
• Starting enrichment automatically disengages when throttle is applied
• Fully-covered carburetor with slow-idle starter prevents the line head from turning during start-up
• Easy-to-service air cleaner element
• For the blade capable model see the KBL27B/BC

For more information, send an e-mail to sales@sleequipment.com or call our store at (615) 641-7720.