A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
This is BRAND NEW Kicker 07CVR12-4 12" 800 Watts Dual 4-Ohm Subwoofer. This Auction is for Purchasing 1 PAIR (2 Subwoofers). The Retail Price is $300.00
The 07CVR124 12" sub boasts dual 4-ohm voice coils that can manage a heavy power onslaught, while adding more options for wiring up your system. UniPlate construction molds parts of the sub's motor structure together as a single unit to optimize heat transfer, improve accuracy, and extend cone excursion. Kicker ComPvr subs can be used for marine applications.
Features
Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 1 ohm load. When the voice coils are wired in series, the woofer presents a 4 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.
Cone Materials: The cone was developed using Kicker's SoloKon technology. The ultra high performance injection molded polypropylene cone remains rigid and minimizes cone flex, lowering harmonic distortion. Distortion in the cone is further reduced with new back bracing.
Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
Enhanced BAM (Basket And Motor) Assembly: The high-strength steel basket features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.
UniPlate Construction: The woofer features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:
Optimizes heat transfer efficiency for cooler operation and maximum power handling ability
Eliminates erratic magnetic flux from the voice coil gap
Releases pressure under the suspension for uniform cone movement and responsive low bass
Prevents the voice coil from bottoming out and corresponding damage
Tinsel Leads: The woofer features sleeved high-power tinsel lead wires to resist breakage and power-robbing resistance losses. The lead wires are terminated with polymer-based strain relieving mechanical fasteners.
Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.
Break-in Period: Due to the complex nature of Kicker Comp VR speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.
Marine Ready: This woofer is made with a powder coated, weather resistant basket and stainless steel hardware, so it can be used in marine and mobile applications.
Specifications
Size
12 -inch
Impedance
4 ohms
Cone Material
Injection molded poly
Surround Material
Santoprene rubber
Sealed Box Volume (cubic feet)
1 - 4.6
Ported Box Volume (cubic feet)
1.75 - 2.25
Free-Air
No
Dual Voice Coil
Yes
Sensitivity
86.7 dB at 1 volt
Frequency Response
25 - 500 Hz
RMS Power Range (Watts)
50-400
Peak Power Handling (Watts)
800
Top Mount Depth (inches)
6 ¼
Cutout Diameter or Length (inches)
11 1/16”
Vas (liters)
95.37
Fs (Hz)
26.1
Qts
0.527
Xmax (millimeters)
12.64
Ship to U.S. and Paypal Confirmed Address Only. NO International Shipping unless pay by T/T. In case of product damage or lost by the shipping carrier, we strongly recommend to the buyers to add the shipping insurance for the merchandise. Without buying the insurance, we are not responsible for any product damages or lost package during the transportation. Shipping this product to Alaska, Hawaii and Puerto Rico will occur additional shipping charge. Please contact seller for more detail prior to purchase.
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
The payment must be received within 3 days after the auction ends. Non-paying buyer will report to Ebay and the negative feedback will be left on your account.
Seller assumes all responsibility for this listing.